An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.
Project in progress by suhaskd
As a free flying paragliding pilot, I have finally built my own simple but effective instrument that plays beep-beep during climb and so on.
Project tutorial by marcozonca
Drones are fun to fly, and it’s possible to do limited flying using brainwaves.
Project tutorial by Tony
This project describes of a low-cost GPS data logger for RC planes. In a previous project I described how to build a GPS data logger.
Project tutorial by yvesmorele
Add more fun to bottle rockets!
Project in progress by mbagrianski
A modular 3D printed throttle quadrant and trim wheel for use with flight simulators.
Project tutorial by markbennettuk
Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!
Project tutorial by alex_chang
CovidTestDrone enables self-administered COVID-19 tests to be delivered within minutes to patient’s homes via drone delivery.
Project tutorial by Andrei Florian
A efficient rocket motor for high and low powered rocketry.
Project in progress by Cole Purtzer
An open-source Arduino base remote controller (transmitter) with many customization options for robots and drones.
Project in progress by alirezasafdari and syamil_zaini
In a previous project I developed a GPS data logger for RC aircraft but I did not have feedback on the receiver. So I modified the prototype
Project in progress by yvesmorele
This is one of my personal budget/project made for University
to graduate. This Airplane (UAV) is made fully homemade using only
Project showcase by Gorceag Victor
It's not only a quadcopter... it's an open source machine!
Project tutorial by RoboCircuits
How to make a DIY Rocket Launcher using Arduino - Design the circuit, make a rocket ignitor and control the launcher from your phone.
Project tutorial by Jithin Sanal
Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Project tutorial by WesleyCMD
The will gimbal a rocket motor back and forth to keep you rocket upright.
This will keep your rocket upright and on course!
A new customizable TVC mount that can stabilize your model rocket!
I just levitated small objects using ultrasonic waves
Project tutorial by edison science corner
Failed but still teaches a lot.
This rocket engine was designed with the priority to go to space!!!!
A small rocket test vehicle that launches without the use of fins!
A Thrust Vector Controlled rocket that can maintain its orientation without the use of fins.
Project showcase by Cole Purtzer
A model rocket that guides itself autonomously.
Or connect with your social account:
New here? Create an account