A simple demonstration of charlieplexing: 12 LEDs are individually lit over 4 wires.
Project showcase by Patrick Prescott
There's a front coming through! Cloud costume, complete with weather patterns.
Project tutorial by Monica Houston
Using LEDs as Binary No. and 2 button switches to add or subtract 1 point per push.
Decoder IR signals using arduino. These codes can be later used in many projects.
An ATtiny-based tiny USB lamp that can be turned on/off by knocking, clapping, blowing, finger snapping and shouting.
Project tutorial by Amal Mathew
Just a basic sound sensor activated LEDs with an optional LCD for sound level data. ***STROBE LIGHT EFFECT AT AROUND 8:45 MINUTE MARK!***
Project tutorial by HeathenHacks
Create your Larson (Cylon or Kit Car) Scanner, controlled by BLE with the Arduino 101, made with Hackster Box
Project showcase by Gustavo Reynaga
We will use 4 LEDs, depending on the level of light that we capture with the LDR sensor.
Project in progress by Rafa Salvador
An alarm that triggers a siren sound an police lights when the beam of light is interrupted.
Project in progress by Vrcg03 and mmgamitoc
A wall of LED where you can spell out messages from the Upside-Down is the best way to impress your friends and to cheat the Demogorgon.
Project tutorial by Luigi Francesco Cerfeda
A WiFi controlled NeoPixel display. Designed for the MKR1000 but should work for the Zero too. A little rough around the edges but works!
Project tutorial by Colin Russell-Conway
Make an Alexa clone using Raspberry Pi 3 and use it to control IOT RGB Lamp (Arduino Nano + ESP8266) that supports Philip Hue commands.
Project tutorial by Pham Hoang Son
Neopixels make a moving rainbow when triggered by a distance less than 1 meter in front of an Ultrasonic sensor.
Project tutorial by Becky Ellis
This project will show you how to fade lights, add a button to it.
Project tutorial by Phuong Vo
Using Teensy (small Arduino) to power NeoPixels off of an electric skateboard battery.
Project tutorial by Ben Schwartz
Build a proximity sensor using aluminium foil and a high value resistor.
Blinking LEDs with Arduino and some buttons.
Project tutorial by Super Kid
Control your home lights when it's ON or OFF using 1Sheeld.
Project tutorial by Nado Hollow
A simple Christmas tree with 9 LEDs (+ 1 extra from Arduino board).
Project showcase by FLORICA Tudor-Nicusor
Wireless charger with interactive light effects that can change the lighting according to the music to make your desktop more interesting.
Project showcase by diy chen
It's not a light bulb, it's three LEDs attached to what (sort of) looks like a light bulb. All controlled by a mini-touch kit.
Project showcase by Maddy
Automate your Christmas tree and get notified when motion is detected around the tree!
Project tutorial by Benny Estes
Color detection with Arduino and smartphone - output on RGB LED using 1Sheeld color sensor.
Project tutorial by Mr robot Maker
My first go at dead bug style soldering. A style of soldering where no PCB is used and all of the components are soldered together.
Project tutorial by wrightmac
Or connect with your social account:
New here? Create an account