Simple device to control and initialize DALI lamps.
Project in progress by NabiyevTR
A hand-crafted 8x8 LED matrix driven on Arduino using the MCP23017 GPIO expander and controlled via Bluetooth from an Android device.
Project tutorial by Salwa El Kaddaoui
You’ll learn about IR protocol and how to use the IR receiver module.
Sending Bytes to an 8x8 LED Matrix.
An easy DIY lamp which can change its colour like a chameleon. Just show it a different colour & see the magic.
Project tutorial by Random Stuff We Make!
This Project we are going how to make a cool POV clock in a simple way.
Project tutorial by Pro Maker_101
This project will show you how to make a DIY flashing LED cube.
Project tutorial by STEMpedia
This is using the laser transmitter and receiver to communicate, and using the Morse code given by the laser transmitter to the receiver.
Project tutorial by SURYATEJA
Arduino based traffic lights using car lights delay to enable safe pedestrian crossing.
Have a very happy birthday celebration using this simple Arduino device that plays the happy birthday tune while flashing lights!
Project tutorial by jsheng
Use the cursor to change the colour of NeoPixels. Create light experiences using visual software like Photoshop or After Effects.
Project tutorial by Geert Roumen
Simulate a traffic light using an Arduino and LEDs! This project is super cool to watch and easy to make!
Project tutorial by Zachary Haslam
A huge Nanoleaf like device made from soldering 12 PCBs each contains 7 WS2812B LEDs and anESP12F
Project tutorial by Arnov Sharma
How to make diffrent patterns for LED Cube 4x4x4 with shift registers
Project tutorial by viliamk
Five channels circuit to control Red, Green, Blue, Brightness and Strobo of your LED lamps in an handy box!
Project tutorial by marcozonca
Binary Clock using LED Matrix module (8x8) and presenting many features: time, date, day of week, week of year and also the Moon phase!
Project showcase by LAGSILVA
Pedestrian walk cycle will only occur when both lights are red AND button has been pressed.
Project showcase by FalcomDigital
A simple gesture-controlled interactive table light, which can encourage kids towards making.
An awesome open source, 3D-printed vase stand with addressable RGB LEDs that fade between selectable colors to light up your life.
Project tutorial by vorpalrobotics
Learn to flash Red and Blue LED's to resemble police Lights.
Project showcase by Jolynn Awesome
How to make balancing LED dot using WS2812 LED strip and MPU6050 accelerometer and gyroscope module.
Project tutorial by Mirko Pavleski
A motion detection lamp. It switches on and off when there's motion.
Project tutorial by Izzati Azryna
Learn the basics of programming timer interrupts on the ATmega328P.
Project tutorial by dhorton668
This is my project about an Analog Clock on a LED matrix and Arduino.
Or connect with your social account:
New here? Create an account