This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
Design of an Indicative Featured and Speed Controlled Obstacle Avoiding Robot.
Project showcase by Team Maverick
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).
Project showcase by Adam
Here is a step by step guide to making a "crawler robot."
Project tutorial by MEGA DAS
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Team Vishal soni
Control an Arduino robot with a smartphone using ESP8266.
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
by Alex Glow
Or connect with your social account:
New here? Create an account