This device runs a desired length and quantity of wires and cuts each length.
Project in progress by 30percent
Easy way to control devices via voice commands.
Project tutorial by Jalal_Mansoori
Nice looking wooden analog style clock with Arduino Nano and 1mA ammeters.
Project tutorial by Mirko Pavleski
Project tutorial by Alex Jonsson
A very easy Genuino UNO project with LCD and DHT11 temp. and humidity sensor. The LCD shows the temp., humidity and other infos.
Project showcase by interpeo
When your stuff is being taken away by a thief, Arduino makes an alert and sends a notification to you via Gmail.
Project showcase by IoT_lover
How to measuring the air quality of the Open Data Institute using an Arduino and a Shinyei PPD-42.
Project tutorial by OpenSensors.io
Make an EC/pH/ORP/temperature sensor device to monitor water. Interact with it through a website using Bluetooth Low Energy.
Project tutorial by uFire
A basic introduction to the low cost and accurate HC-SR04!
Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.
by Team RZtronics
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
A fun, colourful RGB LED matrix with a twist!
Project showcase by Unexpected Maker
Just connect your Arduino smart home and control the heater, airing, and lights via Bluetooth!
Project tutorial by Gyula Osi
An Arduino Uno project that utilizes a laser to detect when the laser beam has been interrupted.
Project tutorial by Ian Cumming
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
How to hack a Wii Nunchuk to make it work with Arduino.
Project tutorial by infusion
In this low-cost project, you can learn fun stuff like laser cutting, coding, mechanics, trigonometry. No Arduino codes required!
Project tutorial by Team KittenBot
wardrobe which can suggest you which cloth to wear, notify you which cloth has been ignored.
Project in progress by Tan See Youu
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
by Inventor Niv
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Project tutorial by SurtrTech
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Project tutorial by Adithya TG
We will teach you that it is possible to write only one Serial.print line to display several messages.
by 3 developers
If there is sensitive data that you want to keep private when sharing a sketch, add a secret tab and store your private info there!
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Or connect with your social account:
New here? Create an account