An example of Blynk app linking the mobile to the Arduino 101 using Bluetooth Low Energy BLE.
by Rafa Juárez
Using the Web Bluetooth API to blink LEDs attached to your Arduino101.
by Gregory O. Voronin
Sometimes you need to generate a analog signal from a digital source a DAC or a digital to analog converter helps you do this.
by Vimanse Dissanayake and Chathura Yapa Bandara
I will show you how to link your PocketCHIP to an Arduino using a HC-05 Bluetooth module.
by Josh From BreakoutBros.com
In this Article i will demonstrate how to connect Arduino MKR1000 with Artik Cloud & monitor salt/Dairy warehouses Temperature & Humidity.
by Muhammad Afzal
This light switch can be turned on and off using designated RFID tags.
Control Lego "Power functions" components with an Arduino board and build your project in the "Ready Maker" editor. (No code required.)
If you ever wanted to build your own smart switch, please read the story below.
Now after connecting all the hardware to the respective pins we start integrating the software for getting MPU readings.
by Samhita Ganguly and Shubham Paul
This is the customized LCD1602 shield for both Arduino MKR and UNO boards.
Countertop lighting? No problem!
by TJ Blevins
Building a rain sensing alarm with Arduino.
by Smit Babariya
Overcoming the one servo restriction and replacing switches, jumpers and potentiometers with software controlled variables.
by Kevin Gagnon
Smart bed system which controls light, temperature, and bed gradient using voice recognition.
by TEAM(JIN SANGJAE, JUNG YUNKYU, HWANG EUNJI)
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
Using the humble nrf24L01+ modules as BLE beacons to send and receive BLE advertisements .
by Pranav Gulati
A beginner project utilising an Arduino and a BME280 sensor capable of giving you 4 environmental readings.
by Electorials Electronics
Recently frauds in eCommerce delivery have increased drastically. What can Azure do about it? Check it out.
by Karthikeyan Balasubramanian
Temboo is very easy to automate the IoT with Arduno YUN, in combination with Blynk and Dropbox to store pictures. All is free and easy.
Set up high speed PWM (1Hz - 1MHhz) to one of your IO pins.
This project will show you how to use an MQ-2 gas sensor.
Do you need a smaller board than Arduino Nano or Micro? I show you my experiment to make a minimal development board with SMD components.
by Vincenzo G.
Manipulate home lights, air conditioning, garage, etc., with Android and Arduino.
by Jesus Guzman
The FlySky joystick is adopted to control the speed and limitations of the ramp of two stepper motors
Or connect with your social account:
New here? Create an account