Display an output on the LED bar graph based on the serial command received from the host.
Project tutorial by ejshea
Three different way of connecting a push button with an Arduino microcontroller.
Connect up to 10 buttons using a single interrupt.
Project tutorial by Svizel_pritula
Have you ever wished for "Arduino app?" A kind of pre-compiled binary file that you may copy to SD card and deploy on multiple boards.
Project tutorial by onelife
This project demonstrates the working with Shift Register.
Tester may block hardwired sensors of common burglary alarms and access systems so protected zone is open, even if the system's in arm mode.
Project tutorial by
Max out the digital I/O on the Arduino Uno Rev3!
RS-485/RS-422 shield, Arduino Uno and Modpoll (Linux).
Project tutorial by Alf81010
Single tap, double tap, triple tap, four-tap, Hold, Single tap and hold.
Project tutorial by Najad
This project illustrates switching using a transistor.
Servo!!! The motor for Robots
Project tutorial by RoboCircuits
An arduiNOOB friendly tutorial for beginners on daisy-chaining.
Project tutorial by HeathenHacks
Using a IR proximity sensor and microcontroller to find the local values of 'g' and will plot a real time damping curve.
Project tutorial by Team CodersCafe
Do you need to have exFAT support? Use long filename? Open multiple files? Or read files with non-English characters? Then check this out!
This project aims to provide insight into the workings of a digital oscilloscope. This project is designed to be an education tool.
Project showcase by wayri
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by Michael Marinis and PCBWay
Training board for essential logic gates.
Project tutorial by saifalikabi
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Project in progress by Turai Botond
A quick and compact Arduino Nano setup with four DIP switches to allow for mode selection. Power is provided by CR2032 battery package.
Project tutorial by Jeremy S. Cook
Receiving and sending the digital and analog signal through AD5669 interface with Arduino to detect the A/D pulses.
Project tutorial by Varul Jain
Retro Atari 65XE plus Arduino Leonardo as USB-keyboard for a modern computer. It will leave the opportunity to use this Atari in native mode.
Project tutorial by Camper Assistant Team
RT-Thread, a powerful multitasking tool optimized for Arduino. You are able to issue shell (FinSH) commands to control your hardware now!
I want to make a spot welder for battery packs or other stuff that cannot be soldered.
Project in progress by
Or connect with your social account:
New here? Create an account