Did you ever get into a situation where you had to wire up two, three or more I2C sensors to your Arduino just to realize the limitation?
What? Program an Arduino from your Raspberry Pi? It's possible, and super easy!
by Zachary Haslam
Easily connect Arduino boards at a great distance over RS485 with Visuino.
by Boian Mitov
This Project will show you how to Burn Hex File For Atmel Microcontroller using Arduino Uno.
Project tutorial by Patel Darshil
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by Michael Marinis and PCBWay
Wirelessly analyze the characteristics of a battery charger to see how or if it is working from anywhere you have internet access.
Project tutorial by David Kanceruk
This is a simple tutorial to create an EMF detector using an ATtiny85 microcontroller.
Project tutorial by Giovanni Gentile
DIY Modbus slave with Arduino UNO and RS485 Shield.
Project tutorial by hwhardsoft
Simple instruction to let you know how to control an AC voltage device using an IR remote control and the Arduino.
by Mohannad Rawashdeh
In this project, we will be making our own Infrared Controller with two joysticks, two face buttons, and two trigger buttons.
Project tutorial by RobotGeek Projects Team
Connecting devices is the way to make IoT devices. Here I show the how to connect my Arduino 101 board with the recent Raspberry Pi.
Project tutorial by Alexis Santiago Allende
How to connect the Arduino MKR 1000 with the WiFi.
by Anton Nazarenko
A quick and simple guide on how to easily connect your Arduino to the pixy cmuCAM!
Project tutorial by Joe
Back when I first started working with micro controllers, the most annoying thing was when a tutorial I'd spent hours following didn't work.
by Dante Roumega
eDOT core is a versatile Arduino board with built-in precision RTC.
Observe the magnetic field integrity and polarity in the air with the 3144E Hall effect sensor. Also, adjust the RGB LED colours easily.
Project tutorial by Kutluhan Aktar
Scratch is a great tool to teach beginners how to code, program interactive stories, and do Physical Computing!
Project tutorial by MJRoBot
Single tap, double tap, triple tap, four-tap, Hold, Single tap and hold.
Project tutorial by Najad
Translate analog XY-plotter output to HP-GL command stream.
Project showcase by johan34
One of the things PocketCHIP can be used for is programming and controlling or processing date from an Arduino. We show you how.
by Josh From BreakoutBros.com
Using the built-in Arduino EEPROM to save and restore values - Quick and Easy.
In this project, I am going to make a LAN cable tester with just a few basic electronics components. It cost me just a bit over $3.
Quality microcentrifuges are generally too expensive for most people to afford. This project aims to provide a low-cost alternative.
Project in progress by kemfic
This project will show you how to schedule to drive the outputs on a MKR Relay Proto Shield using a MKR1000!
Project tutorial by Arduino_Genuino
Or connect with your social account:
New here? Create an account