An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project showcase by Team Maverick
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
by Ingo Lohs
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by MEGA DAS
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
How to use a Servo.
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
Robot arms are awesome! In this tutorial we explore how to control one of them using a Nunchuk and an Arduino Mega.
Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.
by Alex Glow
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!
Project tutorial by Boian Mitov
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
Intel Arduino 101-based tank using Bluetooth Low Energy to communicate with a Blynk remote control on your phone.
Project tutorial by Johnathan Hottell
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
Or connect with your social account:
New here? Create an account