Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
by Ingo Lohs
How to use a Servo.
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.
by Alex Glow
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.
Connect Stepper Motor to Arduino and control it with Rotary Encoder - Quick and Easy!
by Boian Mitov
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by RobotGeek Projects Team
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
This project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
Created to be a whole Robot controller that uses the Arduino Hardware in general, for a while. This looks to improve the code way.
by Tiago Alves
In this article we discuss about how to Servo motor interface with Arduino Uno
by Akshay Joseph
Build a line follower using an LM324N with a backup Arduino Nano.
by Ajaya Dahal
Teaches you how to use the Stepper motor and driver in the Arduino Grove Starter Kit.
Give the axis of an inkjet printer a new job.
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
by Shubham Shinganapure
In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
Or connect with your social account:
New here? Create an account