A robot arm that can be used to grab small objects.
Project tutorial by TEAM√3
This is the basic model of the SMARS robot taken from the Thingiverse.
Project tutorial by Mirko Pavleski
I have revamped the control system of this 20-year-old 5DOF articulated robotic arm with TP controls and programming interface integrated.
Project tutorial by Amit Nandi (BigWiz)
Robo Hazel is a robot prototype made using Arduino and WIZnet S2E module to advance industry 4.0 and solve the problem of message delivery.
Project tutorial by Hamza Khalid
An Arduino Rc Car but it has LCD i2c for sending messages and debugging.
Project showcase by DABOD
Manual and temperature controlled PC chassis fans.
Project in progress by Deep_Sky
A project that uses SG-90 Micro Servos to shoot Lego cannons, because why not.
Project tutorial by ShreyanR
Two servos and a ITG/MPU together with a UNO can keep a platform horizontal while moving the frame around
Project showcase by jorias
Step by Step instruction on how to build a very simple root from scratch by using the Arduino Board.
Project tutorial by Team makersecrets
This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.
Project tutorial by YASH36
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
by Shubham Shinganapure
Do you want to build a Robot that can walk dance and sing for you! Then this is the ultimate guide that can help you through.
Project tutorial by MEGA DAS
Electronic Arm Prosthesis
*Carolina Proaño Photo
Project tutorial by Team Inti Condo
This project is saving time for all parents who hate to change batteries or other mechanisms for the merry-go-round above their baby's bed.
Project showcase by ivanzlatni
so in this tutorial i am going to show you how too buld a line follower robot with adjustable speed
Project tutorial by edison science corner
It is the next generation of remote control cars where signal attenuation is completely out of the picture.
by VISHAL SIVARAMAN
Using an Arduino MKR and L298N H-bridge to drive a NEMA 17 stepper.
Contains Arduino Nano, two step motors and motor drivers, and one servo.
Navibot is a guidance system that helps visitors or patients navigate their way in any new building.
Project showcase by 3 developers
A humanoid arm + hand prototype made of balsa wood
A simple obstacle avoiding robot developed on Arduino platform.
Project tutorial by Aniket Mindhe
Building a RC controlled Pololu (3Pi), using a couple of TX/RX 433Mhz modules and a Joystick.
Project tutorial by Marco
This ball mill was made for grinding sand and cleaning objects like rusty bolts.
Project showcase by tinkersprojects
Transistors are our allies because can control high-voltage motors from a microcontroller pin
Project tutorial by Iasonas Christoulakis
Or connect with your social account:
New here? Create an account