CAN bus hack for reading the battery diagnostics form an electric car.
Project tutorial by MyLab-odyssey
A blind assist tool that provide obstacles notification and GPS location to the guardian / authority via SMS.
Project tutorial by Team MeRo
In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller
Project tutorial by ElectronicsLovers
An SKU237545 pressure sensor.
Project tutorial by Fillbee
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Reads and stores in SD card, the temperature and humidity values over time.
Project showcase by lmsousa
Code and explanation for getting directional and motion data from the raw sensor outputs.
by Samhita Ganguly and Shubham Paul
Let us predict the changes around us with Arduino
Project tutorial by Prajjwal Nag
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Arduino based 5" LCD touchscreen weather station with remote sensor unit.
Project showcase by antiElectron
A pantry which can automatically replenish kitchen items.
Project in progress by Md. Khairul Alam
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
by Muhammad Aqib
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
Project in progress by Gabriel Alejandro Giraldo Santiago
Python user interface to calculate and show latitude/longitude using u-blox LEA-6H 02 GPS module and Arduino.
Project tutorial by Harshgosar
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
A DHT11 connected to Blynk to read data
Project tutorial by Tech with Matthew
Arduino Nano and Visuino: Plot BME280 Temperature, Humidity and Pressure on Nextion Display Scope - Quick and Easy
Project tutorial by Boian Mitov
This smart stick can help blind people walk on the street safely without any help.
Project tutorial by hadi1234
Portable range/distance detection device using an Arduino, ultrasonic sensor, and buzzer.
Project tutorial by Viktor S
Control the temperature of the rooms you are actually in
Project tutorial by BuddyC
this project uses a touch sensor to turn on and off an led on pin 13.
Project tutorial by tech guy
Create a DHT11/DHT22 breakout board for your Raspberry Pi running Windows 10 IoT Core using an ATtiny85.
Project tutorial by Daniel Porrey
Or connect with your social account:
New here? Create an account