Capacitance capabilities at the tip of your finger!
Project tutorial by Tal O
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Tejas Shah
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Project in progress by philippedc
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
Put on your aerospace engineering hat! Explore how different materials absorb and transmit heat to simulate space capsule re-entry to earth!
This project will show you how to use an MQ-2 gas sensor.
A cheap DIY air quality monitoring device.
Project tutorial by Mirko Pavleski
A simple electromagnetic sensor to measure current induced by a moving magnetic field!
A really economic street lighting system.
Project showcase by ReddSathvik
Build a table lamp that's sturdy and smart.
Project tutorial by msr048
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
In this tutorial, you’ll learn how to use the LSM303DLHC GY-511 compass module with Arduino to make a digital compass.
The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.
Project in progress by moisi
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Detect movement up to 30' away which is useful in motion-activated projects such as a security system or automatic lighting in a classroom.
Project tutorial by ejshea
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
An Arduino-based altimeter, mostly for model rocketry.
Project in progress by M4K3R_4_M4R5
We aim to provide a low-cost precision agriculture solution powered by biophotovoltaics, and we start with developing a prototype.
Project in progress by eCO-SENSE
How to read HDC2010 temperature and humidity sensor data and comfort zone alerts Arduino using HDC2010 I2C breakout by itbrainpower.net.
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
How to temperature compensate the Atlas salinity sensor automatically.
by Atlas Scientific
Real-time pH and salinity monitoring with LED indicators.
Or connect with your social account:
New here? Create an account