Thermistors are simple, inexpensive, and accurate components that make it easy to get temperature data for your projects.
Project tutorial by Iasonas Christoulakis
Keep that bad virus away from your safe zone. Build your own real-time thermal vision device to detect unwanted visitors at your door.
Project tutorial by Marius Dima
Brainium Bridge Baby Monitor for predictive maintenance in bridges.
Project tutorial by Alejandro Sanchez and Victor Altamirano
Project tutorial by Techatronic
This is a simple and fun project with pocket friendly budget.
Project tutorial by dnbakshi07
This project will show you how to make a probe using a datalogging Arduino shield, some sensors and an RTC.
Project tutorial by MisterBotBreak
Use the IO Expander and accessories to connect OLED screens and I2C sensors over a 100ft away.
Project tutorial by Christian
Geiger counter measuring radioactivity using Arduino Nano in 3D-printed housing, with OLED display and Li-ion battery.
Project tutorial by Pedro52
Very simple air quality monitor with nice processing graphical interface oh PC monitor.
Project tutorial by Mirko Pavleski
The values of t° sensors DS18B20, waterproofed DS18B20, AM2302 will be compared with micro:bit temperature sensor and standard thermometer.
Project tutorial by Diana Khalipina
Nice looking weather station based on BMP180 and DHT11 sensor boards.
Improve reliability of measurements using PPD42NS sensor using modular 3D printed solution which includes exclosure box for sensor.
Don’t you wish your plants would tell you when they needed to be watered? Take your project from breadboard to PCB with this fun tutorial.
Project tutorial by Patchr
Measure the dew point and humidity with an Arduino-based Chilled Mirror Hygrometer.
Project tutorial by schouten_tjeerd
Add extra layer of security to your ATM machine transactions with biometric fingerprint and OTP SMS.
Project tutorial by Brijesh Singh
Capacitance capabilities at the tip of your finger!
Project tutorial by Tal O
A cheap DIY air quality monitoring device.
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Detect movement up to 30' away which is useful in motion-activated projects such as a security system or automatic lighting in a classroom.
Project tutorial by ejshea
Literally the simplest way to make a weather station!
Project tutorial by Mission Critical
How to interface a GPS module (NEO-6M) with Arduino Mega. The data for longitude and latitude is displayed on the serial monitor.
Project tutorial by Ruchir Sharma
Or connect with your social account:
New here? Create an account