It's not a light bulb, it's three LEDs attached to what (sort of) looks like a light bulb. All controlled by a mini-touch kit.
Project showcase by Maddy
An ATtiny-based tiny USB lamp that can be turned on/off by knocking, clapping, blowing, finger snapping and shouting.
Project tutorial by Amal Mathew
Learn to flash Red and Blue LED's to resemble police Lights.
Project showcase by Jolynn Awesome
This project will show you how to use an RGB LED.
I tried controlling the display of flexible LED matrix with 3D gesture sensor.
Project tutorial by HomeMadeGarbage
Using the power of motion, swipe in 4 directions to change the color of an LED!
Project tutorial by Arduino “having11” Guy
Have a very happy birthday celebration using this simple Arduino device that plays the happy birthday tune while flashing lights!
Project tutorial by jsheng
This project combines the WS2812B RGB LED matrix and PIR motion sensor to greet visitors with a text.
Project tutorial by HeathenHacks
The classic whack-a-mole game using LED lights and a joystick.
Project tutorial by courtlandjensen
NeoPixel's are awesome you can control hundreds, thousands, millions of lights with 3 wires (pwr, signal, gnd). Let's learn how to use them!
by Austin Detzel
Uses a photo resistor to determine whether a room is bright, average or dark. It shows this using 3 LEDs and/or the serial monitor.
Project tutorial by DCamino
You just bought a RGB LED strip kit and you would like to get rid of that cheap hand-held IR remote and to have REAL control.
Project tutorial by Philippe Libioulle
Traffic lights system for a two-street crossing with pedestrian lights, controlled by Arduino.
Project showcase by
A simple demonstration of charlieplexing: 12 LEDs are individually lit over 4 wires.
Project showcase by Patrick Prescott
This project allows the user to create their own light animations!
Can modify each frame, the speed, and loop count.
Project tutorial by Reid Paulhus
A very basic intro into some very cool LEDs!
by Dante Roumega
This is a quick night light that uses PTH LED bricks to light up when it gets dark!
Project tutorial by Lunchbox Electronics
This example demonstrates how to use LDR as a switch; each time you cover the LDR, the LED is turned on (if it's off), and off (if it's on).
Project showcase by muhammed amar slik
My first go at dead bug style soldering. A style of soldering where no PCB is used and all of the components are soldered together.
Project tutorial by wrightmac
This project detects changes in temperature based on your specifications, and then changes the color of a LED to the color of your choosing.
Three LEDs: green, yellow and red that create a traffic light.
Project tutorial by Tech with Matthew
Control your home lights when it's ON or OFF using 1Sheeld.
Project tutorial by Nado Hollow
This is a simple IR sensor block detector for model railroads. It controls three lights: red, yellow and green.
Project in progress by lecurtis
Just a basic sound sensor activated LEDs with an optional LCD for sound level data. ***STROBE LIGHT EFFECT AT AROUND 8:45 MINUTE MARK!***
Or connect with your social account:
New here? Create an account