Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.
Use l298 motor driver to control speed and direction of DC motor and show them in LCD.
Project in progress by ahmed soliman
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.
Project tutorial by Sandeep Sharma
iRobbie is the revolutionary app that brings smartphone power to your Arduino project.
Control toys like a superhero. A DIY video for how to make gesture-controlled car.
Project tutorial by Shubham Shinganapure
Robo Hazel is a robot prototype made using Arduino and WIZnet S2E module to advance industry 4.0 and solve the problem of message delivery.
Project tutorial by Hamza Khalid
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
Let's make a fully autonomous robot using Arduino and IR sensors. It can explore the surface of a table without falling!
Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.
A firefighter Arduino autonomous robot which is capable of detecting, approaching and extinguishing fire.
Project in progress by Alberto Ben
Relatively cheap CNC plotter, that is directly controlled with G-code via own CAM software in PC. This is part of my graduation project.
Project in progress by Rodion Borisov
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
The purpose of our creation is to detect whether a cave is safe to enter without human intervention.
Project tutorial by ACool
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
LASER tank controlled by a PS2 wireless controller and you "fire" the LASER turret remotely too.
Project tutorial by SurtrTech
It's an Arduino-based robot which brings food from the kitchen to my room.
Project tutorial by Arnov Sharma
This project shows how to control a 6DOF robot arm via web.
Project tutorial by phpoc_man
Make a simple robotic arm which has master - slave control, and can record and play the moves.
Project tutorial by WolfxPac
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
Or connect with your social account:
New here? Create an account