While debouncing needs improvement, it's a good start to understand interrupts!
Project showcase by John Boxall and CesareBrizio
I tried animating the eye of a bitmap image using the Micro OLED module and Visuino.
Project tutorial by HomeMadeGarbage
A never-ending quest. An infinite maze. How long will you survive?
Project showcase by Cory Potter
I've created a simple menu with an LCD that controls what an LED does. The menu is easy to edit and adapt for various projects.
by Ian Cumming
This project connects the ADLX345 3-Axis accelerometer to display a location on an 8x8 LED matrix using the MAX7219 LED driver chip.
Project tutorial by Reid Paulhus
A step by step tutorial for visualising the motion of an MPU6050 motion sensor in the form of artificial flight instruments.
Project tutorial by Aritro Mukherjee
This is an uncommon digital clock that can run in three different modes: mode digital and two different modes of binary clock.
Project tutorial by LAGSILVA
This digital clock speaks the time in two languages (English or Portuguese).
A simple but beautifully accurate PWM frequency meter.
Project showcase by Arduino World
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
Project tutorial by Keval Doshi
Build your own Nixie tube clock/thermometer/display with ease.
Project tutorial by Grisha Anofriev
A four-digit seven-segment counter with three options.
Dot Matrix Display is a matrix of LED connected in 16x32 pattern. We can wirelessly transfer messages over mobile to DMD using Bluetooth.
by ASHRU ABHIJIT PATTNAIK
Build your Nixie Tubes display easy.
Project tutorial by Team GRA_AND_AFCH
Are you tired of looking at spinning hands or plain numbers? This clock gives you the time in English!
Project showcase by NoraTheDoggo
This project lets you write on an LCD using Morse code.
Project tutorial by GiHOxp
Gixie Clock is a modern device that reproduces the retro beauty of Nixie tube displays.
Project showcase by xingda
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
Project tutorial by Prasanth K S
eDOT is an Arduino based precision clock and weather station with built in IR remote receiver and automatic brightness adjustment.
Project tutorial by antiElectron
A Matrix Orbital EVE2 3.5" EVE2 TFT, a servo and an AMS Magnetic Sensor Dev kit to show an on-screen 270-degree gauge with 3D-printed knob.
Project showcase by MatrixOrbital
Create a cool watch with Arduino.
Your typical led matrix in a DIY shield! Only 4x4 makes it perfect for beginners/intermediate.
Project in progress by jaguilera_bad
The Nixie Shield allows an Arduino board to connect any Nixie tube to use in your projects.
Project in progress by Marcin Saj
Use your Arduino and build Nixie clock, thermometer and hygrometer. Beautifully made housing and easy to operate.
Or connect with your social account:
New here? Create an account