In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Vision is a torch shaped device to help blind people navigate with greater comfort, speed and confidence.
Project tutorial by Saiyam Agrawal
Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
The project consists of reading values for pitch and roll, and communicating the modified values over serial to the display.
Project tutorial by 4D Makers
Convert PIR into DIY PC's Auto Sleep mode sensor using Arduino
which feels your presence & makes your PC go to or wake up from Sleep mode.
Project tutorial by Team Gadget Programmers
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
With the help of this project, users can preset a desired number of times the pressure cooker whistles before they're alerted accordingly.
Project tutorial by sourav344
Python user interface to calculate and show latitude/longitude using u-blox LEA-6H 02 GPS module and Arduino.
Project tutorial by Harshgosar
Weather Station With Arduino/Genuino, ESP8266, BMP180, DHT22 and Thingspeak.
Project showcase by Tittiamo
Basic instructions on building a simple auto fan.
Project showcase by Ömer Beden
Makes use of a thermistor to display a colour on an RGB LED (One Pixel).
Project tutorial by Ian Cumming
This Smart Blind Assistant helps blind people to sense their environment. This assist device can also be connected through Bluetooth.👁️
Project in progress by Chandru S
A gyroscope-based digital inclinometer using MPU6050/9250 and Arduino.
Project tutorial by Muntadhar Haydar
I decided to make one. I want use Arduino UNO with Ethernets shield, and STC-013 sensor. The data are visible on MQTT Dashboard by Cayenne.
Project tutorial by Giovanni Gentile
This project shows how to find our lat and long of our location using a GPS module.
Project tutorial by sanjiv anand
The values of t° sensors DS18B20, waterproofed DS18B20, AM2302 will be compared with micro:bit temperature sensor and standard thermometer.
Project tutorial by Diana Khalipina
MQ2 Sensor is a gas module and it is suitable to detect Hydrogen, LPG, Smoke, CO, and Alcohol. It has high sensitivity and fast response.
by Junez Riyaz
Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
This project will attempt to show how much alcohol is in the air (semi-quantitative measurements).
Project tutorial by ScottC
Measure distance using JSN SR-04T waterproof ultrasound module and an LCD I2C (cm/inches).
Project tutorial by SurtrTech
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
Predictive maintenance of industrial motors using high precision 3D magnetic sensor TLV493D-A1B6.
Project tutorial by Vishwas Navada
When you put anything in front of your mobile camera and push the button, your mobile will say the color of that thing.
Project tutorial by Ahmed Elsagaan
An automated probe that collect CO2 flux data on lake Mendota, WI.
Project showcase by SHUAI ZHANG
Or connect with your social account:
New here? Create an account