A step-by-step tutorial for interfacing an IMU (Inertial Measurement Unit) sensor with an Arduino and reading the Yaw, Pitch & Roll values.
Project tutorial by Aritro Mukherjee
Check the humidity & temperature of your terrarium with a DTH22 humidity and temperature sensor and display this on an LCD I2C 16x2 display.
Project tutorial by Team GiftedMedia
A project that displays the temperature and humidity of a room on your mobile in real time.
Project showcase by Kaustubh Agarwal
An Arduino powered internet connected weather station sending data to weather underground for storage and viewing.
Project in progress by Dan Fein
LIDAR stands for Light Detection and Ranging. LIDAR is used for many applications including 3D scanning, mapping, laser guidance, etc.
Project tutorial by abhinav
How to measuring the air quality of the Open Data Institute using an Arduino and a Shinyei PPD-42.
Project tutorial by OpenSensors.io
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
A remote controlled vehicle with stereo cameras on a head-tracked pan-tilt unit and wireless 3D first person control via an Oculus Rift.
Project showcase by twhi2525
Anemometer or a wind speed measuring device is a common weather station instrument. It was costly online, so I built one!
Project tutorial by Achindra Bhatnagar
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Project tutorial by SurtrTech
A fall detection system based on Arduino, Windows 10 and Microsoft Azure
Project tutorial by Jiong Shi
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.
A basic introduction to the low cost and accurate HC-SR04!
I built an Arduino Weather Station. It uses a DHT 11 (it will also work with DHT21 DHT22).
Project tutorial by woutvdr
Use an Arduino, two small servo motors with light sensing photo resistors to steer a solar panel towards the sun. UPDATED
Project tutorial by scott mangiacotti
This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.
Project tutorial by Alireza Karkon
Create an OLED screen that shows the date, time in digital and analog format, temperature and humidity.
Project tutorial by Chamath Vithanawasam
An Android app-controlled, Arduino-based kit that receives and analyzes humidity and temperature data.
Project tutorial by Diana Khalipina
Clock without using RTC in Arduino with Temperature and humidity indicator
Project tutorial by ahmadordi
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
+ OLED display, measures in imperial and metric.
Weigh objects, and make decisions based on weight.
Project showcase by Team Arduinotronics
We connect a VL53L0X Laser time-of-flight sensor to an Arduino to measure the liquid level in a tank using ToF ranging.
Project tutorial by Team ProtoCentral
Or connect with your social account:
New here? Create an account