This is my first project, so please like the project and comment down below.
Project showcase by Imperial_Proggramer
Arduino collects and calculates basic statistics on the acquired analog (temperature) data: average, standard deviation, min and max.
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
I'm building working model of differential pressure airflow measure device with analog sensor, instrumentation amplifier and Arduino.
Project tutorial by Team ItMightBeWorse
Move your hand around - lights ON. Move hands over that again - lights OFF. Cool, right?
Project tutorial by ashraf_minhaj
I've always wondered if there were any real differences between temperature and humidity sensors, especially DHT11 and DHT22.
by Achraf Oukheir
It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by AeroGeeks
Need to gauge angles? Here's your module!
Measuring underwater luminosity and temperature with Arduino Uno on hydrobot "Argolith"
Project showcase by Hydrobot Team of 7th Senior High School of Trikala
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
In this project I made a touch sensor using a coin that works based on Arduino Capacitive Sensing Library.
Project tutorial by Amal Mathew
Build your own high-quality water sensor to monitor your pool or spa, using the Amazon Alexa to check on the status of your pool.
Project tutorial by Benjamin Winiarski
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
This project consists of monitoring the level of water in two tanks.
Project tutorial by zezarandrade
this project uses a touch sensor to turn on and off an led on pin 13.
Project tutorial by tech guy
I will explain how connect Arduino with Vibration sensor and LED.
Project tutorial by Alberto Zanon
You activate the bomb by plugging it and hold button to defuse.
Project showcase by Nashboss100
A simple Arduino-based temperature data logger
Project tutorial by Jed Hodson
CO2 monitor and log based on MQ-135 with temperature and relative humidity correction.
Project showcase by ArduinoKoen
We connected a Vernier Temperature Probe and Motion Detector to an Arduino Uno to detect black ice on roads.
Project tutorial by 3 developers
This project shows you how to make a homemade flex sensor.
by Shahir nasar
A compact air quality, temperature and humidity monitor enclosed in a small wooden chest, with a four-row LCD display.
Project tutorial by Fillbee
This project will show you how to make a probe using a datalogging Arduino shield, some sensors and an RTC.
Project tutorial by MisterBotBreak
Or connect with your social account:
New here? Create an account