A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.
Project in progress by Team Petoi
This is one of my personal budget/project made for University
to graduate. This Airplane (UAV) is made fully homemade using only
Project showcase by Gorceag Victor
A fully autonomous fixed-wing glider designed to safely return a payload after being deployed on near-space missions.
Project in progress by kemfic and Abdullah Tarik Agcayazi
Boston Dynamics' robot dog, Spot Mini is unavailable at any price. A Chinese copy is $30,000. Cut 99% of the cost and build one at home.
Project in progress by Mike Rigsby
An open-source Arduino base remote controller (transmitter) with many customization options for robots and drones.
Project in progress by and alirezasafdari
Say Alexa the move, it is automated using the xy plotter that we have made especially for Chess.
Project in progress by Automaters
We present you the radar we created in the MicroLab lab. This radar uses 2 ultrasonic sensors and 1 motor moving continuously 360 degrees.
Project showcase by Team MicroLab Greece
A cool flying bat!
Project showcase by Alireza Karkon
Self-replicating, rapid prototyping open source 3D printer using an Arduino 101 that can be controlled via Internet.
Project showcase by Team Tiny Ants
The mechanism of the project depends on the motion of many wires connected with each other...
Project in progress by Fablab_Irbid
Protect your flying machine!
Project in progress by RoboCircuits
Project tutorial by Kutluhan Aktar
The Otto builder community requested, and here we are developing the best printed circuit board for Otto or any biped robot.
Project in progress by Team Otto PCB
Smart kickboxing pad is for training speed, accuracy, and timing for beginners or expert martial arts, fitness or fun lovers.
Introduction low-cost IoT device for mobility-impaired users.
Project tutorial by Enrico Miglino
B15 HoloBot on Windows 10 IoT Core (Raspberry Pi 2 Model B) + Arduino.
Project showcase by Team Windows IoT
Make a cheap and good looking LED matrix.
Project tutorial by RoboCircuits
Macrophotography of fern gametophytes using a DIY focus stacking system.
Project tutorial by Jennifer Deegan
A humanoid arm + hand prototype made of balsa wood
Make an R2-D2 replica and control it by an app you programmed. Add a Nokia interface which gives you the Star Wars characters info.
Or connect with your social account:
New here? Create an account