Wever is a smart IoT device, which automatically controls the water pump according to the requirement and sends update to internet.
Project in progress by Kaushal Wagle
With MKR1000 and Azure IoT Hub, STM32F4 Discovery Board is used to send acceleration and other random telemetry data to Azure IoT Hub.
Project tutorial by vincent wong
Amazon Dash Replenishment Service Automatic coffee ordering robot using Arduino MKR1000. Never miss another coffee break again!
Project tutorial by coffee-drinkers
If also you, like me, put your vest on the washing machine and wait the best moment for wash the clothes... make SMART your Washing Machine.
Project tutorial by Giovanni Gentile
Position control using wifi from a smartphone sounds too good to be true? Do it with MKR1000.
by Miguel Sánchez
Monitor if the door or the valve gas is open... or if someone opened the cookie jar!
Project in progress by Andrea De Gaetano
An oil container that can automatically order new oil via Amazon DRS when the oil level in the container is low.
Project showcase by Mohammad Haizad
Open source air quality sensor network platform.
Project in progress by BYU Smart City Project
A simple IoT experiment, using an Arduino MKR1000 board to monitor a potentiometer and DHT11 sensor via Favoriot IoT platform.
Project tutorial by Lintang Wisesa
I will be showing you how to make your own wired LEDs for Christmas Sweater.
by Vadim Aleksandrovich
A web-controlled smiling snowball based on the Arduino MKR1000 controlled via WiFi using MQTT, Shitr.io and Node-red.
Project tutorial by Niels van Breederoode
Do you want to conserve energy and turn the Christmas tree lights on/off when not required? In IOT era, that can be done using MKR1000.
Project tutorial by Sameer
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
Controlling a robotic arm to pick up and drop objects is difficult enough, without IoT it would be near impossible to do this remotely.
Project showcase by Madhu Govindarajan and Siddharth Salunkhe
A very basic tutorial on how to interface a microcontroller to an MQTT broker and interact with data on Node-RED.
Project in progress by Officine Innesto
This magnificent model offers a solution in a greater electricity saving, better use of a solar sun power, and reducing the traffic jams.
by Davor Sijanovic
When you have a 'real' Christmas tree, it is important to keep it watered. This project monitors the water level and emails alerts.
Project showcase by Ian Zahn
This project is dedicated to my parents, but you can also use it for surprise events for someone special.
Project tutorial by Muhammad Afzal
Use MKR1000 to show the Santa location in real-time on a colorful world map made of neopixels.
Project tutorial by Bowen Feng
Using an Arduino MKR and L298N H-bridge to drive a NEMA 17 stepper.
In the maker world, only boredom is truly ugly. Prevent boredom with horrible, smart flashy lights!!!
Project tutorial by Alex Glow
The biggest Internet of Things problem may be "What are you"? This is an easy way for things to reply "Hi, I'm a parking space/toaster/car."
Project in progress by yanza
A device made to be portable and easy to install, allows you to control your lights without dealing with the electricity!
Project tutorial by Emmanuel Garuz
Set an alarm with MKR1000 and MKR Relay Proto Shield to turn a lamp on/off.
Project tutorial by David Escobar
Or connect with your social account:
New here? Create an account