Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Project tutorial by Mirko Pavleski
This is an easy to build pet feeder with two timers and accurate portions delivered each time.
Project tutorial by Erik de Ruiter
A cool digital clock which sports the 7 segment display. With its bright red display will make sure you like to keep an eye at the time.
Project tutorial by shivakumarj1995
Garage parking sensor using addressable RGB LEDs to provide feedback to vehicle driver as they approach and reach stop (park) position.
Project tutorial by Bcjams
Musical instrument for multiple users – with Arduino, nRF24L01, MPR121 and MPU-6050 connected to Pure Data Vanilla.
Project tutorial by Tim Krahmer
How to build and configure a control unit based on Arduino for opening, closing and other actions for a motorized sliding door.
Project tutorial by DVDMDN
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by PCBWay and Michael Marinis
A simple yet functional button based MIDI piano.
Project tutorial by Arnov Sharma
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Project tutorial by Najad
A portable small device to verify anywhere the UV index in the sun rays.
Project tutorial by fmarzocca
A pattern lock using Arduino.
Create a burglar-tripwire with the ultrasonic sensor.
Project tutorial by Will_the_Star
The Praduino multimeter is based on Arduino Nano. This multimeter can work on normal power supply or with 3.7V LiPo battery.
Project tutorial by pradyumne
A bit more accurate than __TIME__.
Project tutorial by Mr_Glenn
Partially 3D-printed robot based on Arduino Nano, servos, ultrasonic sensor, and LDR resistors.
The purpose of the project is to detect the passing of cars and people at the entrance to an orchard and a warning beep inside this house.
Project tutorial by Juan Salvador Aleixandre Talens
A digital stadiometer for human height measurement.
This project's final goal is for children with visual impairment or blindness to use the Escornabot and therefore use educational robotics.
Project tutorial by Avilmaru
In this post, I will show you how to build a three legged robot (a tripod) using Arduino and servo motors.
Project tutorial by Greenterminal
Small board - great value (for how a little Arduino Nano is improving our Toastmasters meetings).
Project tutorial by Wellington Duraes
A simple thing that lets you monitor your dog's water intake and reminds you to refill it.
Project tutorial by HeathenHacks
The sequel to Part 1 of the same video title.
This project combines the WS2812B RGB LED matrix and PIR motion sensor to greet visitors with a text.
As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.
Or connect with your social account:
New here? Create an account