The project will allow you to remotely turn your digital TV antenna to maximize your TV channel reception and channel strength.
Project tutorial by calettso
Make water defy gravity, all while creating fantastic lighting effects!
Project tutorial by Team AHS Advanced Physics
Display board using GSM module.
Project tutorial by msr048
There are two sensors as detectors in this project, namely rain sensor and LDR. Rain sensor functions to detect the occurrence of rain/not.
by Susi_Susanti and Binti_mufarida
This project uses a PIR sensor to turn a fan ON/oFF and an LM35 sensor to control the speed of the fan with PWM.
An Arduino-based robot drummer. It works with a transistor noise-generator and an arrangement of servos hitting a can and a pair of piezos.
Project showcase by FrancoMolina
If there were "The Avengers" game for Atari 2600, the soundtrack would sound like this...
Project tutorial by marcelomaximiano
In this tutorial, you will learn how to connect and use a PS2 game console controller with Arduino.
A barn door astrophotography mount made with no special tools.
Project tutorial by Emvilza
Got a KY-016? Stick it straight onto your UNO and start attracting unicorns! No soldering. No schematics. No freaking Fritzing.
Project tutorial by Johan_Ha
A relatively easy to build and quite cheap robotic arm.
Project tutorial by Mirko Pavleski
This exoskeleton was designed to help a patient suffering from paralysis to rehabilitate faster.
Connect up to 10 buttons using a single interrupt.
Project tutorial by Svizel_pritula
This article explains how to generate DTMF tones only using Arduino Uno.
Project tutorial by Dilshan Jayakody
An alarm clock with no physical buttons, just a remote control.
Project showcase by Robin The Tactician
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)
Project showcase by Billy King
+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!
In this tutorial, you will learn how to use and set up 2.4″ Touch LCD Shield for Arduino. Basic setup to a paint app!
An LCD game using a joystick.
It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by Team AeroGeeks
An attendance system based on Arduino and RFID reader which will save attendance data in real-time to Google spreadsheet.
Project tutorial by Embedotronics Technologies
This project demonstrates the working with Shift Register.
Learn how to build a simple battle bot that can be controlled with a PS2 controller via Bluetooth.
Project tutorial by Team CodeDigs
Or connect with your social account:
New here? Create an account