A Home Automation system using a Raspberry Pi 2 and Windows 10 IoT Core including an App.
Project tutorial by Christian Kratky
Control your AC from across the room or across the world
Project in progress by BuddyC
Get your essential appliances off the grid with just one solar panel
Project in progress by Markus Loeffler
Build your own Arduino-powered light switch that can be controlled using Amazon Alexa.
Project tutorial by Tinker Project
How to build and configure a control unit based on Arduino for opening, closing and other actions for a motorized sliding door.
Project tutorial by DVDMDN
There are many charge controllers available, but ordinary cheap ones are not efficient enough to use with maximum power from solar panels.
Project tutorial by Abhi Verma
Open Hardware Home Automation Intelligence integrates multiple existing smart home systems for a more cohesive solution.
Another indoor greenhouse powered by Nano. 100% controlled environment with some extra perks that make life easier.
Project showcase by vinikon
This project demonstrates the use of different technologies and their integration to build an intelligent system for home automation.
Project tutorial by the lonely programmer
Got some old phones? Here's a cool way to reuse your old phone by converting it into a remote switch that can be operated from anywhere.
Project tutorial by Vishwas Navada
How to control water temperature using arduino and water heater element like PID controller
Project tutorial by Mohannad Rawashdeh
Microcontroller based Solar PV System's charge controller, inverter, PowerBank & LED lamp with menu-based navigation system on LCD display
Project tutorial by Shahariar
Smart light that turn on at noon when anyone pass in street and turn off at morning also check its state and report if it need to be fixed.
Project showcase by Fady Tarek
RFID real-time access control based on IOT2020, Arduino and Firebase.
Project tutorial by Team SIT
Let's control a plantation, using real data as temperature, relative air humidity, luminosity and soil moisture.
Project tutorial by MJRoBot
Control aquarium light - sunset, sunrise.
You should never leave your 3D printer unattended... but you do. This device will cut power to your printer when it senses thermal runaway.
Project tutorial by ArtSuzhou
2 wire 8 channel Relay Module || Reduce your CPU workload by interface 74LS164N.
Project showcase by Boaz Lawnce
On this Part 2, we will implement an IoT approach were control will be also possible remotely via Internet.
A touchscreen in the wall that allows you to control each and every LED light in your ceiling independently and phone controllable!
Project in progress by Joey Pongallo
A box with an electro magnetic lock controlled by an Ardiono Nano with a RFID reader. The box is unlocked whenever a valid tag is close.
Project showcase by Pär Stigenberg
A volume control for the TV/receiver using Arduino Nano.
3D-printed enclosure makes it look lite Amazon Dot.
Project tutorial by Sam
This Arduino project automatically switches the watersource solenoid depending on the available stored rainwater.
Project showcase by designedrat
The Sump Level Monitor will determine sump levels, display them locally and send a 0-5vdc signal, relays output or I2c output.
Project tutorial by Kevin Strain
Or connect with your social account:
New here? Create an account