Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by PCBWay and Michael Marinis
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
The Praduino multimeter is based on Arduino Nano. This multimeter can work on normal power supply or with 3.7V LiPo battery.
Project tutorial by pradyumne
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
Project tutorial by raul
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Project tutorial by Najad
A quick and compact Arduino Nano setup with four DIP switches to allow for mode selection. Power is provided by CR2032 battery package.
Project tutorial by Jeremy S. Cook
Probably the most useful Arduino project I've ever made! A automatic tester for a product I sell.
Project tutorial by Brian Lough
A bit more accurate than __TIME__.
Project tutorial by Mr_Glenn
Use the IO Expander and Relay Expander with the Arduino to control up to 65,280 relays!
Project tutorial by Christian
Goodbye calibration! Digitization of pH test paper! This is a pH meter that reads the color of the pH test paper.
Project showcase by hminowa
An Arduino Nano used as an IO expander on I2C for ESP8266. For example, add 8 digitals IO and 6 analog inputs.
Project tutorial by Joel Soranzo
In this tutorial, I am going to talk about the PCF8574 8-bit GPIO port extender.
Inexpensive to build but a very useful tool for every electronics laboratory.
Project tutorial by Mirko Pavleski
Make a cheap variable power supply using the buck converter.
Project showcase by Neeraj Rane
Your personal universal electronics kit. More I/O pins. More devices. More distances. Remote wireless control. No bunch wires.
Project tutorial by Steve Massikker
Did your somewhat expensive ($50) soldering iron just die? Well then fix it with another one!
Project tutorial by NoraTheDoggo
Make a Linux distribution that is focused on the development of Arduino and IoT. It's a Distro for Arduino.
Project showcase by CESARMASSARI
A study for a linear measuring device with Arduino and photoelectric rotary encoder.
Project tutorial by fmarzocca
In this project, I am going to make a LAN cable tester with just a few basic electronics components. It cost me just a bit over $3.
This circuit allows for one thermistor input and will output up to four similar values using digital pots.
by Kevin Strain
Control your Commodore C-64, reset C64, select Kernal, BASIC and Charset ROM, SD2IEC device#, info display.
Project tutorial by Oe7Twj
Track display for a Commodore 1541 floppy drive (retro hardware).
Project showcase by Oe7Twj
I wanted to make an electronics learning kit suitable for ages 12 and above. Nothing fancy like Elenco's kits but It can be done at home.
Project tutorial by Ahmed Mo'nis
A simple yet effective demonstrator of a gear pump endorsed with Arduino Nano + MPU6050 accelerometer to measure vibrations.
Project showcase by FRBB-MECHELEC
Or connect with your social account:
New here? Create an account