You can use different appliances. This project will turn the DC motor on or off by clapping.
Project tutorial by
In this project, I will teach you how to make an obstacle avoiding robot that works with Arduino.
Project tutorial by Aarav Garg
It's a BLDC motor based jet turbine.
Project tutorial by Arnov Sharma
This is a cute linear stage that's about the size of a business card.
Project showcase by noboyu
Easy to build instructions for making the new Nematoduino mk2, an Arduino Uno-compatible robotic simulation of the C. elegans nematode.
Project tutorial by Nathan Griffith
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
by Ingo Lohs
LASER tank controlled by a PS2 wireless controller and you "fire" the LASER turret remotely too.
Project tutorial by SurtrTech
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
Project showcase by potentprintables
MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.
Project tutorial by utilstudio
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Control PWM fans with an Arduino, some basic C# programming and a lot of fun!
Project tutorial by MyName1sSimon
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
It's an Arduino-based robot which brings food from the kitchen to my room.
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
This is my first Arduino-based, Bluetooth-controlled RC car.
Project in progress by Saman Fernando
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.
Have you ever wanted to be able to control a car with your hand? Introducing the Motion Mobile!
Project tutorial by mcharrison500
Or connect with your social account:
New here? Create an account