Speedometer that uses a GPS for speed sensing and an RGB LED to indicate speed to the user. Also features a blinking white light.
Project tutorial by Jeremy S. Cook
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Project tutorial by Mirko Pavleski
It's a screen with colorful backlight that shows you some information about printing progress.
Project tutorial by ralex2304
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
Copy colours from outside environment.
Project tutorial by Vishwas Navada
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
Track the sun in X and Y with this simple Arduino project.
Project tutorial by Brown Dog Gadgets
As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.
Project tutorial by HeathenHacks
Create a burglar-tripwire with the ultrasonic sensor.
Project tutorial by Will_the_Star
The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.
Project tutorial by ElectronicsLovers
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
Periodically measure environmental conditions and send them to WolkAbout IoT Platform to monitor the environment remotely.
Project tutorial by WolkWriter
During the summers, many people get sunstroke because of playing in the sun for too long. So this device will prevent getting sunstroke.
Project tutorial by Hemesh chadalavada
An Arduino electromechanical barometer.
Glowing LED to detect the increase in pressure by pressure pad using Arduino.
Project tutorial by Ashish Kumar Senapati
Build a weather station with Arduino & ASP.NET Core.
Project tutorial by Zhang Yuexin
This project is a GPS tracking system with LCD display using an Arduino Uno and a Digilent PmodGPS.
Project tutorial by Ian Etheridge
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
This project will attempt to show how much alcohol is in the air (semi-quantitative measurements).
Project tutorial by ScottC
How much time do we waste in traffic jams? I made an Arduino-powered destination notifier to utilize this time in a productive way.
Project tutorial by Amal Mathew
This project will show you how to make a DIY Intrusion Detection System.
Project tutorial by STEMpedia
Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
Or connect with your social account:
New here? Create an account