A brief summary of our smart buoy project. We’ll break down the build into separate posts: electronics, 3D print, and dashboard.
Project tutorial by T3ch Flicks
The ball and beam system is laboratory equipment with high nonlinearity in its dynamics and PID control.
Project tutorial by Karem Ben Chikha
Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
by Alex Kutschera
In this tutorial I am going to show you how to build a Wireless Weather Station with a big 3.2" Color TFT display using Arduino.
Project tutorial by Nick Koumaris
This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.
Project showcase by Telina
It can measure fine dust, humidity, temperature and CO2 concentration in the air and check it on the internet in real time.
Project tutorial by 4 developers
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
eNVIRO is an advanced weather station with remote sensor.
Project in progress by antiElectron
This is a low cost, modular smart board with wireless capabilities.
Project tutorial by Adellar Irankunda
Professional quality wireless weather station.
A tech high-school student-teacher team from Uruguay developing High Altitude Balloons for science! IN ACTIVE DEVELOPMENT!
Project in progress by Club AeroEspacial de la Escuela Tecnica de Melo
Or connect with your social account:
New here? Create an account