It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by AeroGeeks
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
How to use the small module to measure distance for high frequency applications... or low.
Project tutorial by SurtrTech
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
+ OLED display, measures in imperial and metric.
Measure distance using JSN SR-04T waterproof ultrasound module and an LCD I2C (cm/inches).
Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.
An Arduino electromechanical barometer.
Project tutorial by Mirko Pavleski
Glowing LED to detect the increase in pressure by pressure pad using Arduino.
Project tutorial by Ashish Kumar Senapati
This project is a GPS tracking system with LCD display using an Arduino Uno and a Digilent PmodGPS.
Project tutorial by Ian Etheridge
This project will attempt to show how much alcohol is in the air (semi-quantitative measurements).
Project tutorial by ScottC
How much time do we waste in traffic jams? I made an Arduino-powered destination notifier to utilize this time in a productive way.
Project tutorial by Amal Mathew
A short and easy tutorial on how to interface the module with UNO board using simple examples.
This is the first version of my Arduino Weather Station, a very simple project that will give you weather information.
Project tutorial by Gabriele Scordamaglia
Predictive maintenance of industrial motors using high precision 3D magnetic sensor TLV493D-A1B6.
Project tutorial by Vishwas Navada
An easy to build thermometer using Arduino, digital temperature sensor, and LCD display.
Measure your light intensity lux using this sensor and simple code.
Project tutorial by afsh_ad
This project uses sensors to monitor indoor natural gas on the basis of Arduino, and will sound the alarm if the gas leak exceeds the limit.
Project tutorial by Andrew85
Very useful project made at school that detects some weather data.
Project tutorial by GilettaStefano
Do you want to build an easy security system? Well this is the perfect tutorial for you!
Project tutorial by Abishek Bhalaaji
For DETECTING fire for about a small range of 3 feets
Or connect with your social account:
New here? Create an account