Pulse induction metal detector, built on the Arduino Nano.
Project showcase by
The detector can detect a small metal coin at a distance of 15 centimeters.
Project tutorial by Mirko Pavleski
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Smarter Home Energy Use with Open Source and Cheap Sensors.
Project in progress by Andrew Jawitz
Here we use PIR sensor and Arduino to detect the motion of a hand. This detection can be used to operate electronic equipment.
Project tutorial by ElectroPeak
This is a very precise scale for any weight up to 1.5 kg!
Dear friends welcome to another tutorial! Today we are going to build an interesting Arduino project which is using a fingerprint sensor ...
Project tutorial by Nick Koumaris
Use the cheap Fiagro TGS4161 Sensor to monitor CO2
Project in progress by Vladimir Savchenko
Let us predict the changes around us with Arduino
Project tutorial by Prajjwal Nag
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
It is hard to measure the height of the children. So, we made Height Measure using distance sensor VL53L0X.
Project tutorial by HomeMadeGarbage
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
Project in progress by Dhairya Parikh
Arduino Nano and Visuino: Plot BME280 Temperature, Humidity and Pressure on Nextion Display Scope - Quick and Easy
Project tutorial by Boian Mitov
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Control the temperature of the rooms you are actually in
Project tutorial by BuddyC
Portable distance detection device using an Arduino and an ultrasonic sensor.
Project tutorial by Viktor S
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
How to build an humidity and temperature meter with time display from an old voltage meter casing.
Project showcase by Mr_Xu
In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller
Project tutorial by ElectronicsLovers
An environmental monitoring system using a Nano, with GPS, BME680, VEML6070, MiCS-5524, BH1750, a 128x64 OLED, and NeoPixels.
Project in progress by Pyre Mage
CPS120 is a high quality and low cost capacitive absolute pressure sensor with fully compensated output.
by Dcube Tech Ventures
Power monitoring, appliance detection using Arduino and save data into a Text file, Google Sheet for creating graphs and analysis.
Project tutorial by bhaskar
Or connect with your social account:
New here? Create an account