Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Project tutorial by Mirko Pavleski
I am back again with another Arduino based home automation project.
Project tutorial by Tarantula3
Pulse induction metal detector, built on the Arduino Nano.
Project showcase by FoxyLab
The detector can detect a small metal coin at a distance of 15 centimeters.
Create a burglar-tripwire with the ultrasonic sensor.
Project tutorial by Will_the_Star
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
A digital stadiometer for human height measurement.
Project tutorial by fmarzocca
As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.
Project tutorial by HeathenHacks
Dear friends welcome to another tutorial! Today we are going to build an interesting Arduino project which is using a fingerprint sensor ...
Project tutorial by Nick Koumaris
This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.
Project showcase by Telina
Build a simple incident light meter for old meterless film cameras
Project tutorial by alankrantas
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
An automated humidor using an Arduino — with or without building your own humidor.
Project tutorial by MatthiasDankers
Monitoring temperature and humidity without using a WiFi connection. Suitable for a chicken coop.
Project showcase by John Weers
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Project tutorial by dev009
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
Copy colours from outside environment.
Project tutorial by Vishwas Navada
This project is about a simple movement detector. Whenever any obstacle comes in a line (predefined) a light will glow.
Project showcase by Sriram MN
The ElectronicsLovers Tech Team built this module, which has one difference from a usual one: it’s digital.
Project tutorial by ElectronicsLovers
UltrasonicEyes is a fun and quirky project you can place somewhere and watch as it looks at things moving around in front of it. Freaky!
Project tutorial by Unexpected Maker
Someone has been eating my cookies! Thankfully Arduino is here to help find out who it is.
Project tutorial by Dante Roumega
An Arduino based device to read multiple DS18B20 sensors and send the values through a RS232 connection to a domotica system.
Project tutorial by WT040
Or connect with your social account:
New here? Create an account