In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.
Project showcase by elegoo-arduino
Experimental system for Structural Health Monitoring (SHM), based on the Arduino.
Project showcase by lamaripalma and e-structure_UNO
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
This little project will show you how to use a soil moisture sensor.
How to use the small module to measure distance for high frequency applications... or low.
Project tutorial by SurtrTech
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
How I built an Arduino energy monitor and data logger to collect energy data for different loads and plotted that data using Excel.
Project tutorial by Sridhar Rajagopal
This Bolt IoT-based project shows how to build a metal detector alert monitor.
Project tutorial by shashi shekhar
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
Spending $1,000 on suspension repairs because the city failed to fix the potholes? This project makes sure that never happens again.
Project in progress by Esther He
Automated colour transmission and reflection measurement system for quantifying results of measurements with a colour change.
Project in progress by Eric Lowe
Read data from an absolute orientation sensor without writing any code!
by Matt Wayland
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
Track the sun in X and Y with this simple Arduino project.
Project tutorial by Brown Dog Gadgets
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
+ OLED display, measures in imperial and metric.
Measure distance using JSN SR-04T waterproof ultrasound module and an LCD I2C (cm/inches).
A smart valve that automatically stops the flammable gas supply when gas leakage takes place or fire occurs for protection.
Project in progress by Ashwini kumar sinha
Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.
Or connect with your social account:
New here? Create an account