It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
How to use the small module to measure distance for high frequency applications... or low.
Project tutorial by SurtrTech
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
How I built an Arduino energy monitor and data logger to collect energy data for different loads and plotted that data using Excel.
Project tutorial by Sridhar Rajagopal
This Bolt IoT-based project shows how to build a metal detector alert monitor.
Project tutorial by shashi shekhar
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
Track the sun in X and Y with this simple Arduino project.
Project tutorial by Brown Dog Gadgets
+ OLED display, measures in imperial and metric.
Measure distance using JSN SR-04T waterproof ultrasound module and an LCD I2C (cm/inches).
Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.
An Arduino electromechanical barometer.
Project tutorial by Mirko Pavleski
Glowing LED to detect the increase in pressure by pressure pad using Arduino.
Project tutorial by Ashish Kumar Senapati
This project is a GPS tracking system with LCD display using an Arduino Uno and a Digilent PmodGPS.
Project tutorial by Ian Etheridge
This project will attempt to show how much alcohol is in the air (semi-quantitative measurements).
Project tutorial by ScottC
How much time do we waste in traffic jams? I made an Arduino-powered destination notifier to utilize this time in a productive way.
Project tutorial by Amal Mathew
How to make a color sensing device using a TCS3200 color sensor.
Project tutorial by munazirali4793 and Creatjet3D-Labs
A short and easy tutorial on how to interface the module with UNO board using simple examples.
Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
Move your hand around - lights ON. Move hands over that again - lights OFF. Cool, right?
Project tutorial by ashraf_minhaj
An Android app-controlled, Arduino-based kit that receives and analyzes humidity and temperature data.
Project tutorial by Diana Khalipina
This project will calculate the water content of soil around a plant by measuring the dielectric constant.
Project tutorial by millerman4487
This is the first version of my Arduino Weather Station, a very simple project that will give you weather information.
Project tutorial by Gabriele Scordamaglia
Or connect with your social account:
New here? Create an account