Store your password in a little, Arduino-based digital wallet. Easily log into your favourite social accounts.
Project tutorial by Giovanni Gentile
Monitor your precious plant wirelessly with FlowerPot monitor.
Project tutorial by Andrei Florian
This project shows you how setup an Intel NUC to interact with a TI SensorTag device using BLE (Bluetooth Low Energy).
Project tutorial by Arduino_Genuino
Use libArduino and MRAA to interact with the board OS and report some nice stats with LEDs.
Project showcase by Arduino_Genuino
This is the next step with an Ultrasonic HC-SR04 Echo and LCD 1602.
Project tutorial by Ingo Lohs
A simple, original and cheap Christmas tree made with LED-illuminated plastic straws that can be controlled over WiFi.
Project showcase by Auri B
Append Temperature and Humidity Values to a Google Spreadsheet.
Measure humidity and temperature levels in your home to avoid unhealthy air quality with this fun project.
Project showcase by KatjaNiggl
This project encodes serial messages into Morse code, and displays the characters on an LCD screen at the same time.
Project showcase by rajdakin
Do you need to have exFAT support? Use long filename? Open multiple files? Or read files with non-English characters? Then check this out!
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture, monitoring, ,etc.
Project tutorial by Dhairya Parikh
Easy 'Hello World' with an RF 433MHz transmitter/receiver module and Arduino.
Project tutorial by hixel
I know the Z-Wave or Netatmo system for IoT, domotic system and automation of house. But now you can make an ESP8266 DoMo system.
This system will help prevent accidents caused by drunk driving.
Project tutorial by Ashwini kumar sinha
Create your own code red button for use in simulation scenarios. Flashing LEDs and button!
Project tutorial by David Escobar
This co-working space has a very poor air conditioning system. Now I have a little help from my MicroView Micro Meteo Station.
When you have a 'real' Christmas tree, it is important to keep it watered. This project monitors the water level and emails alerts.
Project showcase by Ian Zahn
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
Control the status of soil thanks to Arduino mkrfox1200 and some moisture sensor.
Project tutorial by Andrea De Gaetano
At my age you have to get up at night and tend to be tired on the way to the bathroom. Use a PIR-Sensor to trigger the light on!
Project showcase by Ingo Lohs
Ever wanted a car the drives semi-autonomously? There you have it! You only need two diffrent colored lines and it easy to programm it.
Project tutorial by Maxconnor
The purpose of the project is to detect the passing of cars and people at the entrance to an orchard and a warning beep inside this house.
Project tutorial by Juan Salvador Aleixandre Talens
Automatic fans act in stages depending on atmospheric conditions with an alert at full capacity.
Project in progress by Bob Computeers
Internet of Things for all! Mozilla WoT gateway based on Raspberry Pi and ESP8266 powered. Try to create your own gateway and device!
Or connect with your social account:
New here? Create an account