Two sets of timing gates for racing cars in a school solar car challenge that track and report the speed of each car in each of two lanes.
Project tutorial by nfarrier
Turn on/off your fan without getting up, just by using an IR remote.
Project tutorial by Gabriele Scordamaglia and Antonio Di Bella
This is a class voting machine.
Project tutorial by msr048
An aeroponic planter for indoor gardening and improved air purification.
Project tutorial by Team Plant Protector
It's a low-cost and handmade robot with the mission to be attractive to the clients from businesses and help with the rate of services.
Project tutorial by Luis Eduardo Arenas Deseano
Work with AT Commands using your SIM800L module.
Project tutorial by EasyMades
Transfer images over Bluetooth between an Arduino and an Android phone.
Project tutorial by Alf81010
A project using a car brake rotor as a clock.
Project tutorial by xXarduino_11Xx
This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".
Project tutorial by Guillermo Alberto Perez Guillen
Healthy indoor environments system of smart commercial buildings Using Masked Authenticated Messaging (MAM) of the IOTA protocol.
Make water defy gravity, all while creating fantastic lighting effects!
Project tutorial by Team AHS Advanced Physics
Display board using GSM module.
A relatively easy to build and quite cheap robotic arm.
Project tutorial by Mirko Pavleski
An LCD game using a joystick.
PLC IEC-61131-3 ladder programming >>> Modbus TCP/IP >>> PID tuning >>> HMI >>> Wiring diagram.
Project tutorial by saifalikabi
If you have this car, you will be able to avoid obstacles and follow the necessary lines to reach your destination and protect the distances
Project tutorial by TheTNR
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
How to display an image on an analog TV.
Project tutorial by Perozdero123
An Arduino noticeboard using a Bluetooth module.
Aim of this project is to improve the experience of the visually challenged, while making cashless transactions in public.
Project tutorial by Paarth Arkadi
A simple interface circuit to drive VFD displays. No fancy parts required, and runs on serial communication.
Project tutorial by screwpilot
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project tutorial by 5 developers
A light-tracking turret based on two stepper motors - can rotate about 90 degrees in the vertical and 180 degrees in the horizontal plane.
Project tutorial by CesareBrizio
Use Bolt IoT kit and Arduino Uno to make your own anomaly detection & temperature monitoring device in both modes, i. e online and offline.
Project tutorial by ashish anand
Or connect with your social account:
New here? Create an account