Using Teensy (small Arduino) to power NeoPixels off of an electric skateboard battery.
Project tutorial by Ben Schwartz
This project creates a relay and a water pump for monitoring moisture.
Project showcase by Ingo Lohs
A simple, original and cheap Christmas tree made with LED-illuminated plastic straws that can be controlled over WiFi.
Project showcase by Auri Botines
Use libArduino and MRAA to interact with the board OS and report some nice stats with LEDs.
Project showcase by Arduino_Genuino
Create a bar chart with your own data in seconds, all you have to do is edit 3 variables and choose your graph's colour.
Project tutorial by Andrei Florian
This is the next step with an Ultrasonic HC-SR04 Echo and LCD 1602.
Project tutorial by Ingo Lohs
A very basic tutorial on how to interface a microcontroller to an MQTT broker and interact with data on Node-RED.
Project in progress by Officine Innesto
Measure humidity and temperature levels in your home to avoid unhealthy air quality with this fun project.
Project showcase by KatjaNiggl
A very simple sound card / synthesizer circuit using NE555 and MCP41010.
Project tutorial by Team Useless 98
When you have a 'real' Christmas tree, it is important to keep it watered. This project monitors the water level and emails alerts.
Project showcase by Ian Zahn
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
Project tutorial by Giovanni Gentile
Easy 'Hello World' with an RF 433MHz transmitter/receiver module and Arduino.
Project tutorial by hixel
Automatic fans act in stages depending on atmospheric conditions with an alert at full capacity.
Project in progress by Bob Computeers
The purpose of the project is to detect the passing of cars and people at the entrance to an orchard and a warning beep inside this house.
Project tutorial by Juan Salvador Aleixandre Talens
At my age you have to get up at night and tend to be tired on the way to the bathroom. Use a PIR-Sensor to trigger the light on!
This project started from FabLab of Boilchon High School. Turning the button changes the sound.
Project showcase by FabLab of Legends
Do you need to have exFAT support? Use long filename? Open multiple files? Or read files with non-English characters? Then check this out!
This is a low cost robot that will help students in better learning and understanding.
Project showcase by utk6533
The purpose of the project is to create a system of selective opening of shop windows.
This creates a rotating platform for displays.
Don't trust your cubed dice? Leave it to your Arduino.
by Ingo Lohs
An introduction to moisture measurement.
Making a Holiday Lantern for which I can change its 'outfits' to different theme depending on the holiday seasons.
Project tutorial by vincent wong
The task of this machine is to go straight with a flame sensor module that catches the flame and buzzer gives alarm.
Project showcase by giorgiorosso
Or connect with your social account:
New here? Create an account