Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
This project uses an ultrasonic distance sensor to create a pocket of wave interference where a small object can be levitated.
Project tutorial by millerman4487
Replace all your IR remotes control with an Arduino.
Project tutorial by TATCO
When the vibration module detects vibration, the lamp will go on for 2 seconds and this for 3 times.
Project tutorial by MichDragstar
Interface the 8×8 LED matrix and accelerometer. With the corresponding output from the accelerometer the movement of the LED is determined.
Project tutorial by Brink.IO
Move your hand around - lights ON. Move hands over that again - lights OFF. Cool, right?
Project tutorial by
This is an Arduino controlled rubber band Gatling gun. It can hold about 20 rubber bands and it is operated with a USB game controller.
Sketch of transistor tester project from Karl-Heinz Kübbeler, so it's much simpler to study, modify, verify and upload to an Arduino.
It's an Arduino-based robot which brings food from the kitchen to my room.
Project tutorial by Arnov Sharma
This foot controller with a Wah pedal, a preset switch and a few extras acts as a regular MIDI controller that works in all DAWs and VSTs.
Project tutorial by Johan van Vugt
Play Anchors Away to commemorate Veteran's Day 2018. Go Navy!
An alarm clock using a DS1302 RTC and a buzzer. You can set the RTC by a keypad as well as set the alarm.
Project tutorial by SurtrTech
An Android app-controlled, Arduino-based kit that receives and analyzes humidity and temperature data.
Project tutorial by Diana Khalipina
A technique for drastically reducing the pins required by a matrix keypad is described.
Project tutorial by Giovanni Carrera
The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.
This project demonstrates the use of electronics and embedded system with clock.
Project tutorial by the lonely programmer
With zero's, o's and few dashes, we can animate an LCD to make a retro-ish face that has blinking eyes and stuff.
Here's my minimal setup of a coilgun which uses a relay module to trigger the coil.
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
A sensor that recognizes the name of the color of an object based on light sensing and a neural network that learned from previous examples.
Project tutorial by moretticb
This project will calculate the water content of soil around a plant by measuring the dielectric constant.
This Bingo Machine uses two-digit, A4-sized 7-segment displays with WS2811 LEDs and a scoreboard with WS2822 LEDs, all on one Arduino pin.
Project tutorial by Pedro52
This exactly what it sounds like: a little game for two players. the person who clicks the fastest when wins!
Project tutorial by icecreambear
My attempt at bringing a bit of Fortnite to life!
Project tutorial by Michael Darby - 314Reactor
Or connect with your social account:
New here? Create an account