Task scheduling is a transformative way to write maintainable code for Arduino and other AVRs. No more spaghetti code. C++ tutorial.
by Kevin Gagnon
How to control a component via Bluetooth using an HM-10 module.
by Ingo Lohs
Never forget to water your plants or turn off your grow lights. Never over or under water plants with water pump control and drip system.
Project in progress by londonium2021
A Twitter-powered art installation that explores our perception of info found on the Internet.
Project showcase by Astrid Kraniger
This trick teaches you how to use Micro SD/SD card for Arduino and speaker.
Project showcase by HUNMAN
Convert your USB MIDI instruments to wireless using one of these Bluetooth MIDI adapters.
Project tutorial by Joe Bowbeer
Learn how to interface a 4x3 matrix keypad and display its values to an LCD display.
by David A Riewe
This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
Portable, Bluetooth, voice-controlled claw device for drone! Easy to build, cheap, and made out of recycled materials!
Project tutorial by NetWingx
A beginner-tier project I hope will help the fellows that are newbies in the Arduino world!
Project showcase by onatto22
This Project will show you how to Burn Hex File For Atmel Microcontroller using Arduino Uno.
Project tutorial by Patel Darshil
A cheap DIY version of Nanoleaf RGB LIGHT with ATtiny85 and WS2812 RGB strip.
Project tutorial by Arnov Sharma
Open source Smart energy monitor with some new features like Terminal Commands, Readings Logger, and Data Plotting.
Project tutorial by Mohamed Maher
MeArm mounted on smart robot car controlled by 2 Arduino UNOs
Project showcase by benoitdr
This project is based on Anthony Russell's (a.k.a. BADFEED) Tiny Tetris; I just changed its OLED 12C configuration and added a joystick.
Project showcase by Lintang Wisesa and dirakit community
An Arduino car can follow a line.
Project showcase by Liao Ping Lun
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
Do you want to build an easy security system? Well this is the perfect tutorial for you!
Project tutorial by Abishek Bhalaaji
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
This is an Arduino controlled rubber band Gatling gun. It can hold about 20 rubber bands and it is operated with a USB game controller.
Project tutorial by millerman4487
Shows how to build a 2WD (two-wheel drive) voice-controlled robot using an Arduino and BitVoicer Server.
Project tutorial by Marcio Tamagushi
A simple game using Arduino Uno, 16x2 LCD and a push button.
Project tutorial by SRP888
Use a joystick to control a classic drawing toy through two DC motors.
Send your location to the caller via SMS
Project showcase by Jasmeet Singh
Or connect with your social account:
New here? Create an account