The basic working of the robotic hand is based on conversion of flex input (flex sensors) into rotational output (to servo motors).
Project tutorial by Muhammad Sheraz
An arduiNOOB friendly tutorial for beginners on daisy-chaining.
Project tutorial by HeathenHacks
Closed loop universal motor control system using PID algorithm.
Project tutorial by Saulius Bandzevičius
The detector can detect a small metal coin at a distance of 15 centimeters.
Project tutorial by Mirko Pavleski
Make your own clock module for your modular synthesizer!
Project tutorial by Synthemafia
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Garage parking sensor using addressable RGB LEDs to provide feedback to vehicle driver as they approach and reach stop (park) position.
Project tutorial by Bcjams
Magnet levitation toy using Arduino. Cheap and easy to make!
Project tutorial by jsirgado
This is an easy to build pet feeder with two timers and accurate portions delivered each time.
Project tutorial by Erik de Ruiter
A cool digital clock which sports the 7 segment display. With its bright red display will make sure you like to keep an eye at the time.
Project tutorial by shivakumarj1995
Musical instrument for multiple users – with Arduino, nRF24L01, MPR121 and MPU-6050 connected to Pure Data Vanilla.
Project tutorial by Tim Krahmer
How to build and configure a control unit based on Arduino for opening, closing and other actions for a motorized sliding door.
Project tutorial by DVDMDN
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by PCBWay and Michael Marinis
A simple yet functional button based MIDI piano.
Project tutorial by Arnov Sharma
Did you run out of input pins? Don't worry, here is a solution without any shift registers.
Project tutorial by Najad
A portable small device to verify anywhere the UV index in the sun rays.
Project tutorial by fmarzocca
A pattern lock using Arduino.
Create a burglar-tripwire with the ultrasonic sensor.
Project tutorial by Will_the_Star
The Praduino multimeter is based on Arduino Nano. This multimeter can work on normal power supply or with 3.7V LiPo battery.
Project tutorial by pradyumne
A bit more accurate than __TIME__.
Project tutorial by Mr_Glenn
Partially 3D-printed robot based on Arduino Nano, servos, ultrasonic sensor, and LDR resistors.
The purpose of the project is to detect the passing of cars and people at the entrance to an orchard and a warning beep inside this house.
Project tutorial by Juan Salvador Aleixandre Talens
A digital stadiometer for human height measurement.
This project's final goal is for children with visual impairment or blindness to use the Escornabot and therefore use educational robotics.
Project tutorial by Avilmaru
Or connect with your social account:
New here? Create an account