Conversion of an old pinball playfield to an Arduino-driven, fully working pinball machine.
Project showcase by Frogger1108
Trackers generate more electricity than their stationary counterparts due to increased direct exposure to solar rays.
Project showcase by LIMPINGLIM
A robotic hand that emulate the movement of your hand wirelessly through a glove with sensors.
Project showcase by Gabry295
How to make a remote-controlled origami robot with Arduino.
Project showcase by isangmu
Slider for medium camera, with programmable speed and paths.
Project showcase by Guiye Perez Bongiovanni
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
An Arduino Uno-based alarm with motion sensor, three LED outputs and a keypad with password input.
Project showcase by thehack904
A robot that has ultrasonic sensors mounted on a basic servo to detect obstacles, swerve around them, and continue on a random path!
Project showcase by Xavier Tan
Pull into your garage and have a distance sensor tell you when to stop and give feedback through a regular stop light interface.
Project showcase by Rich Noordam
Creating a smart pillbox in collaboration with Samsung
Project showcase by Audrey Leung
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Project showcase by phpoc_man
This is a dog treat dispenser controlled by Raspberry Pi and an Arduino using Cayenne. This is a very basic design and is only a prototype.
Project showcase by Isaac Koczwara
Easy way to control variables with one rotary encoder and OLED display.
Project showcase by yilmazyurdakul
Upgrade old manual kiln to a digital controller with firing schedules (ramp, target, hold) and data logging.
Project showcase by MrRoboto19
Automate your shop vac by sensing the current that your maschines uses.
Project showcase by FranzVicenzi
This example demonstrates how to use LDR as a switch; each time you cover the LDR, the LED is turned on (if it's off), and off (if it's on).
Project showcase by muhammed amar slik
Using a smart GPU2, a smart SHIELD and Arduino we created a simple touchscreen oscilloscope!
Project showcase by Vizic Technologies
Have you started dyeing Easter eggs yet? We at ELEKS have created a smart egg printer powered by Arduino Uno R3.
Project showcase by ELEKS
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
How to use the ArduiBox Open DIN rail enclosure set for Arduino Nano, UNO and Yun Rev 2.
Project showcase by hwhardsoft
An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).
Project showcase by Team Adam
Are you looking to control your tank water level automatically here's the post for you, how can water level be controlled automatically?
Project showcase by karthickcj0083
Code for driving a BLDC motor and adjusting its speed using a pot. This photo shows wires to a slipring in the hollow shaft of a BLDC motor.
Project showcase by mbarraus
Or connect with your social account:
New here? Create an account