In this article, we're going to build a controller that you can use on Steam!
Project tutorial by Ingeimaks Ingeimaks
Diversity Adaptive Obstacle Avoiding Robot
Project showcase by Team Maverick
This project is used to detect the motion of a comatose patient during his treatment. this will be a 24 hours monitoring system.
by Sreehari Thulasi
A touch sensor pad with sound sensor controlling AC/ DC lights.
Project showcase by Anbumachi
This project is related to Arduino and Vb.net.
Project in progress by Team Techno Brothers
A LEGO compatible case for the Arduino Micro to be used together with the Arduino based LEGO power function IR-receiver.
Project tutorial by kengdahl
The Materia 101 is the first official Arduino 3D printer. It runs using an Arduino Mega 2560 and a “RAMPS 1.4” shield. Learn the basics.
The mechanism of the project depends on the motion of many wires connected with each other...
Project in progress by Fablab_Irbid
This project introduces a functional extruder at a reasonable price, which can be affordable to the fablab community and others.
This robot car follows voice command with the help of mobile for serial communication.
Project tutorial by aakash11
Different PLA filaments have different melting points. In this tutorial, we will find the ideal temperature for a specific PLA filament.
This tutorial will enable you to create your own spin on the traditional Magic 8 Ball.
Project tutorial by College Bound
In this tutorial we show some techniques to avoid warping.
Learn how to perfect the first and most important layer of a print by using the “skirt”-feature.
This is part of a Lego themed series of tutorials.
Tips and tricks for using your Materia.
Printing PLA often requires proper cooling. Improve your Materia 101 fan system with a bigger fan and a fan duct design.
There are many things you can fix around the house with a 3D printer. I’m going to fix the button on our microwave oven in the office.
This time we are going to make the casing for a remote control made with Arduino Micro, IR-sensor and an LED.
Work with Slic3r and the Materia 101 and print a pirate hook.
This brick will allow you to include addressable LEDs in your LEGO models.
Using a BPI NB-IoT development board together with Arduino.
by banana pi
What is backlash? What are the causes and symptoms of it? How do we compensate for it?
Make something nice and personal for the holidays with the help of individually addressable RGB LEDs.
Project tutorial by Arduino_Scuola
Or connect with your social account:
New here? Create an account