Make a simple and programmable servo arm out of readily available materials!

A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.

A mini CNC machine made out of cheap materials with a stunning result.

This is one of my personal budget/project made for University to graduate. This Airplane (UAV) is made fully homemade using only Arduino.

This video will illustrate the working principle of the Water Quality Monitoring and Notification System.

Design of an indicative featured and speed controlled obstacle avoiding robot.

Create a simple home automation system using Arduino and an Android phone.

Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.

Bring down the technical and cost barriers of dynamic quadruped robot to a DIY pet.

Secure your house by implementing this handy automatic door management system.

A robotic hand that emulate the movement of your hand wirelessly through a glove with sensors.

Objectives: Heating, aeration, and irrigation. Behavior: Event when the temperature is low or high and the soil is dry. (Videos on Story)

Never miss anyone at your door! A system that notifies your phone and email whenever someone presses the doorbell.

Press 'Power' to switch everything ON/OFF. Press '1' for the fan and '2' for the lights.

Moves chess pieces around the board invisibly and seemingly magically.

Learn how to simulate throwing a dice with the Arduino and 6 LEDs!

Arduino & Rapberry Pi based chess computer that uses Stockfish ,recognises piece positions using reed switches and signals its move

By controlling the LED strip from a computer, you can do almost anything! I used it to create a dancing light show for music.

Smart Garden is a plant environmental monitoring system.

A realtime battery indicator for your project without extra components or using any analog I/Os.

IKEA PS 2014 Pendant Lamp Modification

Long-range wireless sensor based on Whisper Node capable of running for over a year on a single CR2032, transmitting data every 60 seconds.

An Arduino UNO Flash and RAM update with the ATmega2560 as DIL 28 variant.

LED cube 4x4x4, 64 LED diode, 16 forms of work.