This tutorial is about making an automated gate for your driveway for (relatively) cheap with ESP8266, Arduino, and Blynk.

Hi, my name is Rohan Barnwal and in this project I have taught you that how you can build a device which help you to maintain social distanc

Introducing MARK 1, the programmable Arduino Robot Arm. But, that's not all, this Robot Arm can be controlled by Hand Gestures. Here's How..

Arduino Uno used as a voltage meter and a 6 MHz frequency counter displayed on PC.

Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!

Make a simple and programmable servo arm out of readily available materials!

This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors

Upgrade old manual kiln to a digital controller with firing schedules (ramp, target, hold) and data logging.

Solar tracking photovoltaic (dual axis) that follows the sun, using LDR sensors and two DC motors.

Using the ThreadHandler library to run 57 hard real-time threads on an Arduino Uno with only 2048 bytes of memory.

In the first example, we will send “Hello world” command to blink the LED. In the second example, we will do bidirectional communication.

This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.

Inspired by the popular meme, this project plays "Never Gonna Give You Up" by Rick Astley.

Smart automation

This is a tutorial on how to make it work.

Hello! I'm going to show you how to make an Arduino OLED thermometer and hygrometer* with DHT11.

Learn how to control servo motors using an Android application in a mobile device, an Arduino UNO, and HC-05 Bluetooth module.

A simple interface for a homemade (or commercial) antenna rotator. Manual command or USB via computer tracking software - EasyComm protocol

A 20x4 RGB LCD clock that can display over 500 poems using Arduino and an SD card reader.

An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.

A simple gesture-controlled interactive table light, which can encourage kids towards making.

Interface a 16x2 Liquid Crystal Display with Arduino Uno. Here we just use 4 wires.

Learn how to make a powerful Arduino GPS tracker that posts data to the cloud via LTE CAT-M and view data graphically on IoT dashboards!