A robotic tower crane made out of Lego Technic, Arduino boards, 3D printed parts, off-the-shelf DC gear motors, and addressable RGB LEDs.

Exciting project to display the direction of tilt using 8x8 led matrix.

Smart hand sanitizer will take place of employee attendance system and temperature gun with smart notification and record data.

Brought to the marked in 1976, Zilog's Z80 was the most widespread processor in the '80s until the 2000s. Let's bring it to life again!

The FlySky joystick is adopted to control the speed and limitations of the ramp of two stepper motors

è un automazione di un braccio pneumatico in grado di smistare il legno da ferro

Autonomously functioning farmbot integrating IoT, image processing, automation, and Android application.

This magnificent model offers a solution in a greater electricity saving, better use of a solar sun power, and reducing the traffic jams.

My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely

Ultra low-cost flow-through photometer for on-line measurements of bacterial density.

A digital device that visualizes analog signal.

Failed but still teaches a lot.

This is an effort to automate almost everything in our home. Open Builds mechanical components are also used to automate curtains.

This tutorial takes you through the intricacies of setting up your RAK811 Lora node to talk to AWS ioT via the TTN LoRaWAN network

Controlling Home Lights using Facebook Chat messages with the help of Arduino, ESP8266 WiFi and a relay board.

Control home appliances from anywhere in world using Internet. Make your home smart with Arduino and ESP8266 WiFi Module.

These 84 by 48 pixel LCDs are what you might have found in Nokia 3310. And what about using them in the Arduino projects?

A smart pollution control device is set near the exhaust of the vehicle to alert the user when they are wasting fuel and causing pollution

An open-source, Arduino-compatible RF signal generator with Wi-Fi connectivity.

This project consist on a simple catch the beat game on Arduino. Using a trimmer potentiometer and a 8x8 Matrix LED table.

Mobile electronical device for blind and visual impaired people mobility.

This LED Display Module can works with two-color LED matrix in two sizes (large and small), as well a 7 segments x 4 digits.

This robot took part in a competition and solved the maze.

My project is about how to make a smart home with IoT.