A simple interface circuit to drive VFD displays, no fancy parts required, it runs on serial communication

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Spending $1,000 on suspension repairs because the city failed to fix the potholes? This project makes sure that never happens again.

6-channel digital sampling oscilloscope with built in frequency counter, maximum sampling rate 47kHz.

An IoT wearable technology to haptically guide users with visual impairments/obstructions while monitoring their environment.

A light-tracking turret based on two stepper motors - can rotate about 90 degrees in the vertical and 180 degrees in the horizontal plane.

Control an MAX7219 with an HC-06 Bluetooth module and your mobile phone.

This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.

Use Bolt IoT kit and Arduino Uno to make your own anomaly detection & temperature monitoring device in both modes, i. e online and offline.

Portable lighting station synchronized with music, with the Infineon CoolMOS C7 MOSFET.

Despacito melody using Arduino Uno.

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

It is about a delta robot that can grab and move objects. It is connected to a Raspberry Pi to play Tic Tac Toe using computer vision.

We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

Water quality, anywhere, anytime!

This is an Arduino camera module, using the surveillance camera's digital image processing chip-OV0706.

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

ARTIK cloud-based smart parking system.

MeArm mounted on smart robot car controlled by 2 Arduino UNOs

We will try to make a simple CNC machine with you.

Arduino Safe - 6 digit Passcode

Vintage-style, minimal sized enclosure for a Raspberry-Pi + Arduino Internet Radio.

Traffic Light Information System that lets the driver know at which speed he needs to drive in order to pass the green light.

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......