Three ways to use Arduino as a USB to TTL converter. Helpful one!
by Patel Darshil
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
by Ingo Lohs
Visualize DHT22 sensor readings collected using Arduino Uno. Data is uploaded over MQTT using ESP8266 and visualized using Thingsboard.
This project will show you how to transmit variables to control a servo motor.
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
Calibrating Atlas Scientific's EZO pH sensor using Arduino Uno.
by Atlas Scientific
The trashcan in our office isn't smart. No smarter than a 1 year old baby which can shout and cry to make its needs heard anyway.
by Bolt IoT Developers U.P. Region
Did you ever wonder what happens between the time you click on "Upload" and your sketch starts running? Here's how you can find out...
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
Here we will learn how to build a simple workflow with Node-Red to post the Serial output of Arduino to Twitter.
by Sankar Cheppali
A write up that would show how to connect the maker (hardware) channel of IFTTT to hundreds of channels.
by Kaustubh Agarwal
You can upload your design to your Nextion LCD with USB UART. No need to use an SD card. Fast and easy.
by Tamer Savaşcı
How to make LAN/Ethernet relay switch using Arduino UNO and ethernet shield ENC28j60.
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
We make several projects on various platforms and we always need the codes of any appliance, console, etc just by using an Arduino.
nRF24L01 radio transceiver provides very efficient and inexpensive way to establish communication between microcontrollers.
by Robin Kanattu Thomas
Using the VL53LO and an Arduino for distance measurement.
As ESP8266 works on 3.3V and not 5v, it is important to perform this task.
In this tutorial I am showing how you can control 3 RGB LEDs using your voice command.
NeoPixel's are awesome you can control hundreds, thousands, millions of lights with 3 wires (pwr, signal, gnd). Let's learn how to use them!
by Austin Detzel
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can issue AT commands from your computer.
With the coming .NET Core 3.0, cross-platform serial port is available. Let's have a try on RPi Raspbian.
by Leon Song
A standard speaker can be used to detect vibrations and send data to a microcontroller.
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
Or connect with your social account:
New here? Create an account