Ever thought of controlling any electronic devices with your smart phone? Today I will show how to do it.
by Mayoogh Girish
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
This tutorial will illustrate the working of an RFID reader.
by Aritro Mukherjee
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
Connect your microcontroller to the internet by adding ESP8266 WiFi module!
by Jefferson Paredes
Things you should know using ESP8266 WiFi module for its safety and easiness as it's very delicate module to use.
by Patel Darshil
We're showing how to use KY-038 Sound Sensor using Arduino. You can control LED by clap with the help of Arduino and sound sensor.
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
Did you know that a standard three-wire PC Fan can be used as a sensor?
by Daniel Porrey
This project will guide you to set up an alarm system using a motion detector.
by Team ONYX
Arduino Project: How to make a Fidget Spinner RPM counter with Hall-effect sensor.
by Andriy Baranov
Want to display text? Here is your component!
Why use a relay module when plain relays are cheaper? We will show you how to control your lights with an Arduino.
by Josh From BreakoutBros.com
Keypads are used in all types of devices, including cell phones, fax machines, microwaves, ovens, door locks, etc.
You can communicate your Nextion LCD with your Arduino UNO by Software serial ... a liitle tricky but not much :)
by Tamer Savaşcı
Learn how to use the 16x2 LCD with Arduino for various projects.
A basic introduction to the low cost and accurate HC-SR04!
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by RobotGeek Projects Team
Need your project to gauge distance? Here's your module!
Connect I2C Character LCD Display to Arduino and program it - quick and easy!
by Boian Mitov
Have a successful connection between Arduino and Raspberry Pi using I2C Communication Protocol.
by Madhav Reddy
In this article, you will learn how to run OLEDs by Arduino, and display text, images, and animations on them.
We make several projects on various platforms and we always need the codes of any appliance, console, etc just by using an Arduino.
Measure rotation speed (RPM) with Optocoupler and Encoder disk and Arduino - Quick and Easy!
Or connect with your social account:
New here? Create an account