Improved serial debugging, with debug levels and simple software debugger, to see/change global variables, add watch, or call a function.
Project tutorial by JoaoLopesF
Do you want to conserve energy and turn the Christmas tree lights on/off when not required? In IOT era, that can be done using MKR1000.
Project tutorial by Sameer
Use to record somebody's blow strength. Since without calibration it is relative value.
Project tutorial by Wen-Liang Lin
Use the Arduino IOT Cloud to set a temperature goal and switch a red and green LED on /off to represent
Project tutorial by greg
Connecting your Arduino to the Arduino IOT Cloud and display the temperature on the Cloud.
A Remote Patient Monitoring System that gives health workers remote access to patient's vitals without physical contact with patients.
Project tutorial by Le'Knox Ayenie
Periodically measure environmental conditions and send them to WolkAbout IoT Platform to monitor the environment remotely.
Project tutorial by WolkWriter
If the WiFi connectivity goes down, this will reboot the router.
Low cost, easy build pick to light system.
Project tutorial by PAJ
Holidays came but you need to guess your gift's password! It's a great starting point if you're new to Arduino MKR1000, networking & Android
Project tutorial by Ahmed Hamdy
Connect a basic sensor station to Arduino Cloud and visualize real time data.
Project tutorial by Arduino_Genuino
A simple IoT experiment, using an Arduino MKR1000 board to monitor a potentiometer and DHT11 sensor via Favoriot IoT platform.
Project tutorial by Lintang Wisesa
Automate your holiday wreath using an Arduino MKR1000, NeoPixels, and a buzzer. Get notified via SMS/email when someone is at the door.
Project tutorial by CJA3D
Let your legacy mailbox send you SMS notifications, thanks to IFTTT.
Project tutorial by Adrien Sales
Ever wanted to control a cockroach on the cheap? Now you can!
Project tutorial by bravoechonovember
Getting started with Python and Arduino MKR1000 for secure IoT projects.
Project tutorial by Luigi Francesco Cerfeda
This is a project that will show you how to create a Wi-Fi controlled RC Car that will recharge wirelessly while it is parked.
Project tutorial by Ioannis Kydonis
Setup an Arduino MKR1000 board to read temperature data and send those readings to ARTIK Cloud for monitoring.
Project tutorial by Team FoxLab
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Project tutorial by Officine Innesto
Use Arduino CLI tools to code, compile and upload programms to your Arduino Board. Follow this tutorial for getting started with arduino-cli
Project tutorial by Jithin Sanal
How to setup an MKR1000 and publish an event or location to Wia.
Project tutorial by Spivey
This simple project shows how to make an app that controls an Arduino MKR1000 board with Evothings Studio by communicating over the TCP.
Project tutorial by Chandana Pathirage
In the second project in my pick to light, I am using WIFI to pass the data between PC and Arduino.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
Or connect with your social account:
New here? Create an account