We will teach you that it is possible to write only one Serial.print line to display several messages.
by 3 developers
This project demonstrates the working with Shift Register.
This is a simple library for the common anode LTS 546AWC single digit display. Allows to turn on off segments and display digits.
This project illustrates switching using a transistor.
Why you can blank, void setup()
Drag-and-drop graphical programming portable software for Windows + uploading + supervision.
Making a simple system to controll a lamp or some other appliance in your house.
by Team Azoreanduino
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
This tutorial will show you how to use DHT11 with Arduino.
Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.
Just drag and drop prefabs to make a PC user interface to Arduino, without coding in PC.
Standalone Arduino 6-channel triggered oscilloscope with optional freeze frame.
Arduino-Android car controlled via Bluetooth module.
The Arduino Bluetooth Relay 12 Channels App supports control of a 12 channel relay module via Bluetooth (HC-05, HC-06, HC-07 ect.) modules.
Integrate Blockly@rduino in IDE like a tool, compile and upload through Arduino IDE, totally graphic way.
by Team LibrEduc
It reads from up to eight temperature sensors (DS18B20) and displays on the LCD display (16x2)
we performed the control of the stepper motor in the forward and backward directions along the x axis with the joystick
by Team Arduino Applications
This library allows an Arduino to easily display numbers and characters on a 4 digit 7-segment display without a separate 7-segment display.
Give this the parameters you want and the LEDs will light up according to the temperature cold blue, green fine, red hot
by Team Luca McLoughlin
This project produces an audible warning with LED buzzer ISD1820 output when KY-037 input signal is over the limit.
A simple time count (down) with 7-segments displays.
by João Pereira
A simple tutorial on getting readings from an ultrasonic sensor
by Damien Murtagh
This project detects changes in temperature based on your specifications, and then changes the color of a LED to the color of your choosing.
An IoT communication framework.
Or connect with your social account:
New here? Create an account